Won't do much good for MLS though I question if it's really needed: C4006 (enable) sess 2 Trying IntlgLineCard-2... Connected to IntlgLineCard-2. Escape character is '^]'.
User Access Verification Password: C4006L3>en Password: Password: C4006L3#conf t Enter configuration commands, one per line. End with CNTL/Z. C4006L3(config)#mls ? % Unrecognized command C4006L3(config)#mls Dave Tim O'Brien wrote: > > Layer 3 card for the Cat4003 and Cat4006 is the WS-X4232-L3. List is > $14,995. Description below. > > Catalyst 4000 E/FE/GE L3 Module, 2-GE(GBIC),32-10/100 > > Tim > > ----- Original Message ----- > From: "Thomas" > To: > Sent: Thursday, October 25, 2001 2:45 PM > Subject: Mulilayer Switch (MLS) on CAT 4006 [7:24142] > > Hi All, > > I wonder if CAT 4006 switch support MLS? It doesn't seem to have a layer 3 > card. I wonder if I can enable MLS using an external router, or pointing it > to the MSFCs of a CAT 6500 that have MLS enabled? Thanks! > > Thomas N. -- David Madland Sr. Network Engineer CCIE# 2016 Qwest Communications Int. Inc. [EMAIL PROTECTED] 612-664-3367 "Emotion should reflect reason not guide it" Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=24158&t=24142 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]