Can't say I've tried that. First question, why is MLS sooo important that you feel you must do this?? There are legitimate reasons for MLS but I see to many people turn knob only because they are there:(
That aside I don't think you can. On the external devices on which you can do this your terminating the trunk on a routed interface whereas on the 6509 the trunk terminates on a layer 2 interface if you follow my thinking. Dave Thomas wrote: > > Okie, > > Here is my CAT 4006 specs and topology. My 4006 has a Supervisor Engine II > (WS-X4013). It has an uplink TRUNK to a CAT 6509 that has MSFC doing > routing between VLANS and has MLS enabled. > > My question is if I have MLS configured on MSFC of the 6509, the enabling of > MLS on CATOS of 4006 via 6509 MSFC as the MLS-RP working? Thanks! > > Thomas N. > > ""MADMAN"" wrote in message > [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > > Sure if you use an external MLS-RP, 75xx, 72xx, 4500, 4700. I'm > > reasonably sure it's a hardware issue with the WS-X4232-L3. > > > > Dave > > > > Thomas wrote: > > > > > > Hi All, > > > > > > I wonder if CAT 4006 switch support MLS? It doesn't seem to have a > layer 3 > > > card. I wonder if I can enable MLS using an external router, or > pointing > > it > > > to the MSFCs of a CAT 6500 that have MLS enabled? Thanks! > > > > > > Thomas N. > > -- > > David Madland > > Sr. Network Engineer > > CCIE# 2016 > > Qwest Communications Int. Inc. > > [EMAIL PROTECTED] > > 612-664-3367 > > > > "Emotion should reflect reason not guide it" -- David Madland Sr. Network Engineer CCIE# 2016 Qwest Communications Int. Inc. [EMAIL PROTECTED] 612-664-3367 "Emotion should reflect reason not guide it" Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=24159&t=24142 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]