Where's the phone number to dial? I've always used a phone number after the broadcast statement. Like the following:
dialer map ip 172.20.10.2 name New_York_City broadcast 17775551212 HTH Darren At 05:27 PM 11/2/2001 -0500, nettable_walker wrote: >11/2/2001 4:30pm Friday > >Professional's, I would like to get traffic from Paris to use ISDN when the >primary link goes done. >When the serial link goes down the ISDN never comes up. I even added a >static route to send ALL traffic from the ethernet to the BRI and the BRI is >not coming up! I did a clear ip route * to no avail. > >Any ideas ? I am sure it is a "simple" detail. > >Config follows: > > > >Paris#sho run >Building configuration... > >Current configuration : 1457 bytes >! >version 12.2 >no service single-slot-reload-enable >service timestamps debug uptime >service timestamps log uptime >no service password-encryption >! >hostname Paris >! >logging rate-limit console 10 except errors >aaa new-model >aaa authentication login default local >aaa authentication login NO_AUTHEN none >aaa authentication ppp default if-needed local >enable password cisco >! >username New_York_City password 0 cisco >username richard password 0 cisco >username kaiser password 0 cisco >ip subnet-zero >no ip finger >! >no ip dhcp-client network-discovery >! >! >! >! >interface Ethernet0 > description line to ftp server > ip address 10.0.0.1 255.0.0.0 >! >interface Serial0 > description line to 2522_router > ip address 170.17.1.2 255.255.0.0 > no fair-queue >! >interface Serial1 > no ip address > shutdown >! >interface BRI0 > ip address 172.20.10.1 255.255.255.0 > encapsulation ppp > dialer idle-timeout 900 > dialer map ip 172.20.10.2 name New_York_City broadcast > dialer-group 1 > isdn spid1 1111 > isdn spid2 1111 > isdn x25 static-tei 0 > cdapi buffers regular 0 > cdapi buffers raw 0 > cdapi buffers large 0 > ppp authentication chap > ppp multilink >! >router eigrp 100 > network 10.0.0.0 > network 170.17.0.0 > auto-summary > no eigrp log-neighbor-changes >! >ip kerberos source-interface any >ip classless >ip route 10.0.0.0 255.255.255.255 BRI0 >ip http server >! >dialer-list 1 protocol ip permit >! >! >line con 0 > transport input none >line aux 0 >line vty 0 1 > password cisco >line vty 2 4 >! >end > >Paris# x$:0`0:$x,,,,x$:0`0:$x,,,,x$:0`0:$x,,,,x$:0`0:$x$:0`0:$x,,,,x$:0`0:$x,,,,x Lucent Technologies NetworkCare Professional Services http//www.lucent.com/netcare/ Darren S. Crawford - CCNA, CCDA, CCIE Written Northwest Region - Sacramento Office Voicemail (916) 859-5200 x310 Pager (800) 467-1467 mailto:[EMAIL PROTECTED] x$:0`0:$x,,,,x$:0`0:$x,,,,x$:0`0:$x,,,,x$:0`0:$x$:0`0:$x,,,,x$:0`0:$x,,,,x "You always have time for things you put first" - Tucker Resources Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=25138&t=25129 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]