Your making it too hard, you don't need the dialer map but you do need a dialer string 18001112222. Your not telling the interface where to call.
Dave nettable_walker wrote: > 11/2/2001 4:30pm Friday > > Professional's, I would like to get traffic from Paris to use ISDN when the > primary link goes done. > When the serial link goes down the ISDN never comes up. I even added a > static route to send ALL traffic from the ethernet to the BRI and the BRI is > not coming up! I did a clear ip route * to no avail. > > Any ideas ? I am sure it is a "simple" detail. > > Config follows: > > Paris#sho run > Building configuration... > > Current configuration : 1457 bytes > ! > version 12.2 > no service single-slot-reload-enable > service timestamps debug uptime > service timestamps log uptime > no service password-encryption > ! > hostname Paris > ! > logging rate-limit console 10 except errors > aaa new-model > aaa authentication login default local > aaa authentication login NO_AUTHEN none > aaa authentication ppp default if-needed local > enable password cisco > ! > username New_York_City password 0 cisco > username richard password 0 cisco > username kaiser password 0 cisco > ip subnet-zero > no ip finger > ! > no ip dhcp-client network-discovery > ! > ! > ! > ! > interface Ethernet0 > description line to ftp server > ip address 10.0.0.1 255.0.0.0 > ! > interface Serial0 > description line to 2522_router > ip address 170.17.1.2 255.255.0.0 > no fair-queue > ! > interface Serial1 > no ip address > shutdown > ! > interface BRI0 > ip address 172.20.10.1 255.255.255.0 > encapsulation ppp > dialer idle-timeout 900 > dialer map ip 172.20.10.2 name New_York_City broadcast > dialer-group 1 > isdn spid1 1111 > isdn spid2 1111 > isdn x25 static-tei 0 > cdapi buffers regular 0 > cdapi buffers raw 0 > cdapi buffers large 0 > ppp authentication chap > ppp multilink > ! > router eigrp 100 > network 10.0.0.0 > network 170.17.0.0 > auto-summary > no eigrp log-neighbor-changes > ! > ip kerberos source-interface any > ip classless > ip route 10.0.0.0 255.255.255.255 BRI0 > ip http server > ! > dialer-list 1 protocol ip permit > ! > ! > line con 0 > transport input none > line aux 0 > line vty 0 1 > password cisco > line vty 2 4 > ! > end > > Paris# -- David Madland CCIE# 2016 Senior Network Engineer Qwest Communications 612-664-3367 Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=25160&t=25129 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]