Serial interfaces usually wont go up with out a cable, The no keep or keep 0 work on Ethernet, but not serial to my knowledge.
If its a Wict1DSU card in the router you can create a loopback with and RJ-45 connector Just crossconnect Pins 1&4 and 2&5, that should create a loopback Erich -----Original Message----- From: Rajesh Kumar [mailto:[EMAIL PROTECTED]] Sent: Wednesday, November 28, 2001 4:22 PM To: [EMAIL PROTECTED] Subject: Re: serial up/up w/o cable [7:27604] No keepalive or keepalive 0 should work. rajesh Tom E wrote: > How can you get a serial interface to go up/up without a cable connected? I > have tried loop and no keep. [GroupStudy.com removed an attachment of type text/x-vcard which had a name of pikumar.vcf] Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=27612&t=27604 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]