Set it up to do dial. See below.
Brian Dennis, CCIE #2210 (R&S)(ISP/Dial) CCSI #98640
5G Networks, Inc.
[EMAIL PROTECTED]
Gateway#sho int s0
Serial0 is up (spoofing), line protocol is up (spoofing)
Hardware is HD64570
MTU 1500 bytes, BW 1544 Kbit, DLY 20000 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation HDLC, loopback not set
Keepalive not set
Last input never, output never, output hang never
Last clearing of "show interface" counters never
Input queue: 0/75/0 (size/max/drops); Total output drops: 0
Queueing strategy: weighted fair
Output queue: 0/1000/64/0 (size/max total/threshold/drops)
Conversations 0/0/256 (active/max active/max total)
Reserved Conversations 0/0 (allocated/max allocated)
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
0 packets input, 0 bytes, 0 no buffer
Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
0 packets output, 0 bytes, 0 underruns
0 output errors, 0 collisions, 2 interface resets
0 output buffer failures, 0 output buffers swapped out
0 carrier transitions
DCD=down DSR=down DTR=down RTS=down CTS=down
Gateway# sho contr ser 0
HD unit 0, idb = 0xC04F7C, driver structure at 0xC0AE10
buffer size 1524 HD unit 0, No cable
cpb = 0x2, eda = 0x2940, cda = 0x2800
RX ring with 16 entries at 0x4022800
00 bd_ptr=0x2800 pak=0xC0E520 ds=0x402C60C status=80 pak_size=0
01 bd_ptr=0x2814 pak=0xC0E2D4 ds=0x402BF50 status=80 pak_size=0
02 bd_ptr=0x2828 pak=0xC0E088 ds=0x402B894 status=80 pak_size=0
03 bd_ptr=0x283C pak=0xC0DE3C ds=0x402B1D8 status=80 pak_size=0
04 bd_ptr=0x2850 pak=0xC0DBF0 ds=0x402AB1C status=80 pak_size=0
05 bd_ptr=0x2864 pak=0xC0D9A4 ds=0x402A460 status=80 pak_size=0
06 bd_ptr=0x2878 pak=0xC0D758 ds=0x4029DA4 status=80 pak_size=0
07 bd_ptr=0x288C pak=0xC0D50C ds=0x40296E8 status=80 pak_size=0
08 bd_ptr=0x28A0 pak=0xC0D2C0 ds=0x402902C status=80 pak_size=0
09 bd_ptr=0x28B4 pak=0xC0D074 ds=0x4028970 status=80 pak_size=0
10 bd_ptr=0x28C8 pak=0xC0CE28 ds=0x40282B4 status=80 pak_size=0
11 bd_ptr=0x28DC pak=0xC0CBDC ds=0x4027BF8 status=80 pak_size=0
12 bd_ptr=0x28F0 pak=0xC0C990 ds=0x402753C status=80 pak_size=0
13 bd_ptr=0x2904 pak=0xC0C744 ds=0x4026E80 status=80 pak_size=0
14 bd_ptr=0x2918 pak=0xC0C4F8 ds=0x40267C4 status=80 pak_size=0
15 bd_ptr=0x292C pak=0xC0C2AC ds=0x4026108 status=80 pak_size=0
16 bd_ptr=0x2940 pak=0xC0C060 ds=0x4025A4C status=80 pak_size=0
cpb = 0x2, eda = 0x3000, cda = 0x3000
TX ring with 1 entries at 0x4023000
00 bd_ptr=0x3000 pak=0x000000 ds=0x000000 status=80 pak_size=0
01 bd_ptr=0x3014 pak=0x000000 ds=0x000000 status=80 pak_size=0
0 missed datagrams, 0 overruns
0 bad datagram encapsulations, 0 memory errors
0 transmitter underruns
0 residual bit errors
Gateway#
""Tom E"" wrote:
> How can you get a serial interface to go up/up without a cable connected?
I
> have tried loop and no keep.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=27625&t=27604
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
