It is correct, but according to my knowledge, it will still show down/down even the cable is attached. The only way to bring it to up/up if other side is also connected along with the encapuslation and other parameters. It is different then Ethernet where the physical port will go up as soon as the cable is detected.
Abbas -----Original Message----- From: anil [mailto:[EMAIL PROTECTED]] Sent: Wednesday, November 28, 2001 4:49 PM To: [EMAIL PROTECTED] Subject: RE: serial up/up w/o cable [7:27604] Tom, I don't think you can!! HDLC is the default, and requires cable attached in order for the router to show "up". There is no way to simulate as far as I am aware. Having said that, someone will prove me wrong no doubt. -Anil -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Tom E Sent: Wednesday, November 28, 2001 11:53 PM To: [EMAIL PROTECTED] Subject: serial up/up w/o cable [7:27604] How can you get a serial interface to go up/up without a cable connected? I have tried loop and no keep. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=27615&t=27604 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
