Usually frame-relay is only used up to T1 speeds and you would want your central location to have the aggregate amount of all three remote sites.
-----Original Message----- From: Yatou Wu [mailto:[EMAIL PROTECTED]] Sent: Friday, February 01, 2002 12:21 PM To: [EMAIL PROTECTED] Subject: frame relay question [7:34090] Hi, if there are one central site and three remote sites. all the remote sites need to connect to the central site. now I need to decide the access circuit and port speed for the central site. the CIR requirement are following: Remote site A: 14M Remote site B: 14M Remote site C: 14M how many T3 access Circuits and ports are needed for the central sites? any advise is highly appreciated! yatou _________________________________________________________________ Join the worlds largest e-mail service with MSN Hotmail. http://www.hotmail.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=34097&t=34090 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
