Is ATM a consideration? I believe you can get up to OC12 speeds with ATM, and you can use FRATM ( frame to ATM ) to connect your remotes. Assuming your telco can support you there, you would have the best of both worlds, so to speak.
HTH Chuck ""Yatou Wu"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > thanks for your reply. sorry that I didn't make my question clear. > > Actually what I want to know is that, if the port speed requirment to every > remote site is 28mb, then the aggregate port speed requirement in central > site would be 84mb. should I order 2 T3 access circuits or 3 at the central > site? if 2, how can i config the 3 DLCI across the 2 T3 circuits? because > there would be 1 DLCI needed to be split between the 2 T3 circuits. > > thanks again! > > Yatou > > > >From: "Patrick Ramsey" > >To: [EMAIL PROTECTED], [EMAIL PROTECTED] > >Subject: Re: frame relay question [7:34090] > >Date: Fri, 01 Feb 2002 13:41:34 -0500 > > > >I usually use the 1 to 8 rule.... for every 8mb you think you need, order > >1 > > > >Will each facility be pumping a solid 14mb across the wan all day long? > > > >If so, one ds3 (45mb) will suffice at the HQ....then purchase shaped DS3 > >circuits for the WAN... (15mb shape) > > > >-Patrick > > > > >>> "Yatou Wu" 02/01/02 01:20PM >>> > >Hi, > > > >if there are one central site and three remote sites. all the remote sites > >need to connect to the central site. now I need to decide the access > >circuit > >and port speed for the central site. the CIR requirement are following: > > > >Remote site A: 14M > >Remote site B: 14M > >Remote site C: 14M > > > >how many T3 access Circuits and ports are needed for the central sites? > > > >any advise is highly appreciated! > > > >yatou > > > > > >_________________________________________________________________ > >Join the worlds largest e-mail service with MSN Hotmail. > >http://www.hotmail.com > > >>>>>>>>>>>>> Confidentiality Disclaimer This email and any files > transmitted with it may contain confidential and > >/or proprietary information in the possession of WellStar Health System, > >Inc. ("WellStar") and is intended only for the individual or entity to whom > >addressed. This email may contain information that is held to be > >privileged, confidential and exempt from disclosure under applicable law. > >If the reader of this message is not the intended recipient, you are hereby > >notified that any unauthorized access, dissemination, distribution or > >copying of any information from this email is strictly prohibited, and may > >subject you to criminal and/or civil liability. If you have received this > >email in error, please notify the sender by reply email and then delete > >this email and its attachments from your computer. Thank you. > > > >================================================================ > > > > > > > > > > > _________________________________________________________________ > Send and receive Hotmail on your mobile device: http://mobile.msn.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=34104&t=34090 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]