In some parts of the world, one can get up to 45 mbs ( T3 ) frame support. YMMV.
Chuck ""Stull, Cory"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Usually frame-relay is only used up to T1 speeds and you would want your > central location to have the aggregate amount of all three remote sites. > > -----Original Message----- > From: Yatou Wu [mailto:[EMAIL PROTECTED]] > Sent: Friday, February 01, 2002 12:21 PM > To: [EMAIL PROTECTED] > Subject: frame relay question [7:34090] > > > Hi, > > if there are one central site and three remote sites. all the remote sites > need to connect to the central site. now I need to decide the access circuit > > and port speed for the central site. the CIR requirement are following: > > Remote site A: 14M > Remote site B: 14M > Remote site C: 14M > > how many T3 access Circuits and ports are needed for the central sites? > > any advise is highly appreciated! > > yatou > > > _________________________________________________________________ > Join the worlds largest e-mail service with MSN Hotmail. > http://www.hotmail.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=34105&t=34090 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
