Try pinging into the network. I wouldn't trust the results of pinging the router's own serial interface. Routers have more important things to do than respond to pings. I can't say for sure (better read that IOS Architecture book!), but I think the IOS responds to pings at a low priority. Try pinging a PC on the other side of the router instead.
Priscilla DW wrote: > > The devices are both 2610's. I am telnetting to one of the > 2610's and > pinging the serial interface / Frame Relay subinterface on the > directly > connected devices (Not pinging into the network). The leased > line is running > PPP. What is strange is that it is the same result across both > links. The > Min/Max/Avg times fluctuate constantly with one being as bad as > 40ms/560ms/75ms. > > > > ""Robert D. Cluett"" wrote in message > [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > > What type of device? > > What layer 2 protocol? PPP or HDLC? > > What is the source and destination of the ping? > > ""DW"" wrote in message > > [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > > > I am running 2 WAN links through the same router and have > been have > > session > > > disconnect problems recently. I have been running several > ping tests > > across > > > both of the links (128K FR and 512K Leased line) and they > are both > showing > > > response times fluctuating from 30ms to 1400ms (No dropped > packets). I > > > believe this is the root of the problem. What could be > causing this > delay > > > through the router ??? The memory and processor usage looks > to be within > > > tolerable limits. I am also assuming this kind of delay is > not normal, > > would > > > I be right ?? > > > > > > All answers appreciated ! > > Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=50141&t=50018 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]