I didn't realize it yesterday but a peer of mine has a 3660 HSSI connected to a 6 port DS3 module in a 7304 which would be the same config wise as a PA-T3. There is one command to be aware of, the "csu mode" interface command that you would use on the PA-T3:
c7304(config-if)#dsu mode ? cisco Set DSU mode to Cisco digital-link Set DSU mode to Digital-Link kentrox Set DSU mode to Kentrox larscom Set DSU mode to Larscom c7304(config-if)#dsu mode This 3660 happens to be conected to an Adtran which support the default Cisco mode. Dave John Neiberger wrote: > > I've never had to deal with DS3 connections before and I'm a little bit > lost. All of my local Cisco contacts are out of the office today so I > thought I'd ask this here. > > I need to connect a 7513 to a 3662 via point-to-point DS3 and I'm not > sure what hardware I need. It appears that my only option on the 3662 > side is a HSSI interface. The 7513 has HSSI and T3 port adapters > available. My first question is this: can I have HSSI on one side and > the T3 port adapter on the other or would I need to get HSSI interfaces > on both ends? > > I know I'm demonstrating my ignorance here but I've never had to order > anything larger than a T1. :-) > > Any helpful info would be appreciated! > > Thanks, > John -- David Madland CCIE# 2016 Sr. Network Engineer Qwest Communications 612-664-3367 "You don't make the poor richer by making the rich poorer." --Winston Churchill Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=56149&t=56094 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]