I forgot to mention that these will be frame circuits, not ATM or point-to-point.
Thanks to you and to Dave Madland for clearing this up. Considering this hardware costs several times more than that required for T1 speeds and below, I don't want to screw up and find out about it later! John ""todd osterberg"" wrote in message news:200210230438.EAA07109@;groupstudy.com... > The adapters don't need to match in both routers. You can use HSSI in the > 3600 and T3 PA in the 7513. Are you provisioning the DS3s as ATM circuits? > If so, look at the ATM modules for 3600 series. I have had no problems using > the single port ATM NM on the 3640 chassis. > > Email me if you have other q's > > > Todd Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=56123&t=56094 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]