Brett Johnson wrote: > > I am running a test on two 3660 routers with multiple CSU cards > and > cross-over t1 cables between the two routers. I am unable to > exceed 75% > capacity on any t1 no matter how much data I pump into the > router. Below is > a sample config for one of the interfaces, the rest are > duplicates with > different addresses: > > > controller t1 1/0 > framing esf > clock source internal > channel-group 0 timeslots 1-24 speed 64 > > interface serial 1/0:0 > ip address 10.0.0.1 255.255.255.0 > encapsulation ppp > no ip route cache > no ip mroute cache > > ip route 0.0.0.0 0.0.0.0 serial 1/0:0 > > Is there a way to use the full bandwidth (CEF, 7200 router with > CEF and > multiport CSU, external CSUs...) or is this a limit of the > hardware and > setup? > > Thank you, > > Brett Johnson > >
Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=60031&t=60022 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
