I am running a test on two 3660 routers with multiple CSU cards and
cross-over t1 cables between the two routers. I am unable to exceed 75%
capacity on any t1 no matter how much data I pump into the router. Below is
a sample config for one of the interfaces, the rest are duplicates with
different addresses:
controller t1 1/0
framing esf
clock source internal
channel-group 0 timeslots 1-24 speed 64
interface serial 1/0:0
ip address 10.0.0.1 255.255.255.0
encapsulation ppp
no ip route cache
no ip mroute cache
ip route 0.0.0.0 0.0.0.0 serial 1/0:0
Is there a way to use the full bandwidth (CEF, 7200 router with CEF and
multiport CSU, external CSUs...) or is this a limit of the hardware and
setup?
Thank you,
Brett Johnson
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=60022&t=60022
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
