do you have the PPP interface on router 'B' in OSPF area 0? do you have
'full' OSPF adjacency on the PPP link?
--
------------------------------------------------------------------------
Michael W. Oliver, CCNP |
IPv6 & FreeBSD mizark | "The tree of liberty must be refreshed
[EMAIL PROTECTED] | from time to time with the blood of
http://michael.gargantuan.com/ | patriots and tyrants."
(via IPv4 and IPv6) | - President Thomas Jefferson
IPv6 ASPathTree, Looking Glass |
------------------------------------------------------------------------
----- Original Message -----
From: "Bruno Fernandes"
To:
Sent: Sunday, January 05, 2003 11:06 AM
Subject: OSPF question [7:60342]
> OK Rookie question
>
>
> I have 2 routers connected with a PPP link (serial)
>
> Router A in area 0
> Router B in area 20
>
> I have several loopback interfaces in Router B area 20 and announced as
> area 20, I have configured the loopback interfaces with C class
> addresses. But when I issue a show ip route in Router A I think I should
> see the network announced with a class C mask but it appears with host
> mask.
>
> I have tried with EIGRP and everything appears to be normal.
>
> Do I need to summarize in Router A ?
>
> Any ideas?
>
>
> Thanks in advance,
> BF
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=60345&t=60342
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
