Configure ip ospf network point-to-point on the loopback interfaces. They will then be announced as their "natural masks, rather than the /32 host masks.
Debbie On Sun, 5 Jan 2003, Bruno Fernandes wrote: > OK Rookie question > > > I have 2 routers connected with a PPP link (serial) > > Router A in area 0 > Router B in area 20 > > I have several loopback interfaces in Router B area 20 and announced as > area 20, I have configured the loopback interfaces with C class > addresses. But when I issue a show ip route in Router A I think I should > see the network announced with a class C mask but it appears with host > mask. > > I have tried with EIGRP and everything appears to be normal. > > Do I need to summarize in Router A ? > > Any ideas? > > > Thanks in advance, > BF Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=60433&t=60342 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
