in this case, 2&7 are error subcodes of error code 3 what's hth?
Charles ""Vicuna, Mark"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Not quite.. code 2 only reaches subcode 5. Route loop would be code 3 > subcode 7. > > hth, > Mark. > -----Original Message----- > From: Charles [mailto:[EMAIL PROTECTED]] > Sent: Sunday, January 05, 2003 1:43 PM > To: [EMAIL PROTECTED] > Subject: Re: BGP problem [7:60338] > > > hey, > > %BGP-3-NOTIFICATION: sent to neighbor x.x.x.x 2/7 > > BGP-3 means it's a BGP UPDATE message error > 2/7 are the error subcodes (I believe!) > 2- unrecognized well known attribute > 7- AS Routing loop > > take a closer look at your configs, etc... is it possible you've got a > loop > on your hands? > > hope this helps, > Charles > > > > ""Amr Essam"" wrote in message > [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > > Dear all > > > > I have been receiving this msg in all my routers during the past month > > and I have searched on how I can remove it but I didn't have any luck > to > > find anything can tell on how to remove this entry to appear in my log > > The entry is: > > > > %BGP-3-NOTIFICATION: sent to neighbor x.x.x.x 2/7 > (unsupported/disjoint > > capability) 0 bytes > > > > I hope I can find some advice on how to remove this entry to appear in > > my router logs > > > > Regards > > Amr Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=60372&t=60338 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]