I've lost some telnet access to my 2950 after implementing vlans. Before - Address 10.0.0.6 was available on vlan 1, which was the default vlan for all ports. telnet was possible into the switch from machines connected to any port.
After - Created several vlans (5, 6, 7, and 8) and split the ports among them. Now when I do: switch(config)#interface vlan 5 switch(config-if)#ip address 10.0.0.6 255.255.255.0 switch(config-if)#no shutdown the vlan interface that was previously up shuts down and only boxes connected to the ports in vlan 5 are able to telnet into the switch. Is there a way to allow boxes on ports assigned to other vlans to telnet into the switch at 10.0.0.6? James Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=63789&t=63789 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
