FWIW The system name clears but not the prompt. I'm running 7.2.2: C4006A (enable) set system name System name cleared. C4006A (enable) set prompt Usage: set prompt C4006A (enable)
Dave ericbrouwers wrote: > Hostnames and prompts can be changed by just entering the command with no > string; hit enter after command: > > Switch(enable) set system name > or > Switch(enable) set prompt > > Eric > > ----- Original Message ----- > From: "Eagles Fan" > To: > Sent: Thursday, February 27, 2003 3:32 PM > Subject: Cat4006 - Prompt [7:63984] > > > >>is it possible to clear the prompt after manually setting it? >> >>_________________________________________________________________ >>Protect your PC - get McAfee.com VirusScan Online >>http://clinic.mcafee.com/clinic/ibuy/campaign.asp?cid=3963 -- David Madland CCIE# 2016 Sr. Network Engineer Qwest Communications 612-664-3367 "You don't make the poor richer by making the rich poorer." --Winston Churchill Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=64025&t=63984 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]