Couldn't you also do a "set prompt switch" since I think switch is 
the default prompt.

   Dave

Eagles Fan wrote:
> Thanks for all of the suggestions, however the request was to clear (or 
> revert to default) the prompt, not change it.  According to TAC, the only 
> way to accomplish this, on 4006 Sup II, is to clear the config and restore 
> the configuration after removing the "set Prompt" line.  See, this was 
> causing issues the Ciscoworks RME, but there is a patch to resolve this
bug.
>   Thanks for all of the input.
> 
> Good Day.
> 
> 
> 
> 
> 
> 
>>From: "Steve Wilson" 
>>Reply-To: "Steve Wilson" 
>>To: [EMAIL PROTECTED]
>>Subject: RE: Cat4006 - Prompt [7:63984]
>>Date: Fri, 28 Feb 2003 09:48:55 GMT
>>
>>The following works on my cat4006.
>>
>>Cisco Systems, Inc. Console           Fri Feb 28 2003, 02:24:02
>>Enter password:
>>cat4006> enable
>>Enter password:
>>cat4006> (enable) set prompt eaglesfan> (press return key)
>>eaglesfan> (enable) set prompt cat4006>
>>cat4006> (enable) exit
>>Session Disconnected...
>>Cisco Systems, Inc. Console           Fri Feb 28 2003, 02:25:04
>>Enter password:
>>cat4006>
>>
>>Have fun,
>>Steve Wilson
>>Network Engineer
>>
>>-----Original Message-----
>>From: Eagles Fan [mailto:[EMAIL PROTECTED]
>>Sent: 27 February 2003 20:51
>>To: [EMAIL PROTECTED]
>>Subject: Re: Cat4006 - Prompt [7:63984]
>>
>>I have tried that, unfortunately it doesn't take
>>
>>cat4006> (enable) set prompt
>>Usage: set prompt
>>cat4006> (enable)
>>
>>
>>
>>
>>
>>
>>
>>>From: "ericbrouwers"
>>>Reply-To: "ericbrouwers"
>>>To: [EMAIL PROTECTED]
>>>Subject: Re: Cat4006 - Prompt [7:63984]
>>>Date: Thu, 27 Feb 2003 18:02:39 GMT
>>>
>>>Hostnames and prompts can be changed by just entering the command with no
>>>string; hit enter after command:
>>>
>>>Switch(enable) set system name
>>>   or
>>>Switch(enable) set prompt
>>>
>>>Eric
>>>
>>>----- Original Message -----
>>>From: "Eagles Fan"
>>>To:
>>>Sent: Thursday, February 27, 2003 3:32 PM
>>>Subject: Cat4006 - Prompt [7:63984]
>>>
>>>
>>>
>>>>is it possible to clear the prompt after manually setting it?
>>>>
>>>>_________________________________________________________________
>>>>Protect your PC - get McAfee.com VirusScan Online
>>>>http://clinic.mcafee.com/clinic/ibuy/campaign.asp?cid=3963
>>>
>>_________________________________________________________________
>>MSN 8 with e-mail virus protection service: 2 months FREE*
>>http://join.msn.com/?page=features/virus
> 
> _________________________________________________________________
> Add photos to your e-mail with MSN 8. Get 2 months FREE*.  
> http://join.msn.com/?page=features/featuredemail
-- 
David Madland
CCIE# 2016
Sr. Network Engineer
Qwest Communications
612-664-3367

"You don't make the poor richer by making the rich poorer." --Winston
Churchill




Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=64262&t=63984
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]

Reply via email to