That' right... But for me any reliability value less than 255/255 is a line problem.. check the cables and connectors.. Did you change them?... mustafa
-----Original Message----- From: Spio Wagus [mailto:[EMAIL PROTECTED] Sent: Saturday, March 15, 2003 5:18 PM To: [EMAIL PROTECTED] Subject: RE: DS3 slow connection problem. [7:65491] clear the counters on both routers and find out the rate of new error accumulation. check the interface after say 5 mins and see if you get new more errors and we can take it from there. check the controllers for errors too. -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Mark Walmsley Sent: Saturday, March 15, 2003 6:21 AM To: [EMAIL PROTECTED] Subject: DS3 slow connection problem. [7:65491] Hi All, I need some help to troubleshoot a problem, I have a 7500 router with a ds3(45Mbps) connected to a 7200 ds3 (45Mbps). The line appears to be very slow and is showing input errors on the 7200 and 7500 serial interfaces. Here's some info below from the serial interfaces on both the 7200 and the 7500 showing the errors. If you need more info please tell me what you need to see and i'll post it. Thanks very much for your help. 7200. Serial4/0 is up, line protocol is up Hardware is M1T-T3 pa Description: ****-DS3-**** Internet address is ***.***.***.***/30 MTU 4470 bytes, BW 44210 Kbit, DLY 200 usec, reliability 254/255, txload 21/255, rxload 13/255 Encapsulation HDLC, crc 16, loopback not set Keepalive set (10 sec) Restart-Delay is 0 secs Last input 00:00:00, output 00:00:00, output hang never Last clearing of "show interface" counters never Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 2028 Queueing strategy: fifo Output queue :0/40 (size/max) 5 minute input rate 2270000 bits/sec, 1660 packets/sec 5 minute output rate 3721000 bits/sec, 1440 packets/sec 5130206 packets input, 675673959 bytes, 0 no buffer Received 0 broadcasts, 0 runts, 0 giants, 0 throttles 0 parity 70621 input errors, 68181 CRC, 0 frame, 601 overrun, 0 ignored, 1839 abort 4675498 packets output, 1691575679 bytes, 0 underruns 0 output errors, 0 applique, 2 interface resets 0 output buffer failures, 0 output buffers swapped out 13 carrier transitions rxLOS inactive, rxLOF inactive, rxAIS inactive txAIS inactive, rxRAI inactive, txRAI inactive 7500 Serial0/0/0 is up, line protocol is up Hardware is cyBus PODS3 Serial Description: ****-DS3-**** Internet address is ***.***.***.***/30 MTU 4470 bytes, BW 44210 Kbit, DLY 200 usec, reliability 255/255, txload 8/255, rxload 19/255 Encapsulation HDLC, crc 16, loopback not set Keepalive set (10 sec) Last input 00:00:00, output 00:00:00, output hang never Last clearing of "show interface" counters never Queueing strategy: fifo Output queue 0/40, 215 drops; input queue 0/75, 0 drops 5 minute input rate 3357000 bits/sec, 1318 packets/sec 5 minute output rate 1502000 bits/sec, 1513 packets/sec 256936267 packets input, 174282583 bytes, 0 no buffer Received 0 broadcasts, 0 runts, 7 giants, 0 throttles 0 parity 159026910 input errors, 159025003 CRC, 0 frame, 1640 overrun, 761 ignored, 267 abort 279300042 packets output, 2839210992 bytes, 0 underruns 0 output errors, 0 applique, 1 interface resets 0 output buffer failures, 0 output buffers swapped out 619 carrier transitions LC=up CA=down TM=down LB=down TA=down LA=down Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=65497&t=65491 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]