Sam,

Well for certain I’m filled with envy considering I’m sitting in the Pacific 
North West and thought last weekends 63 degrees was fantastic for sailing 
(winds 10 - 15 KTS).  But I’d much rather be where you are!  I’m a relatively 
new sailor with a 26’ that I’ve had for about 6 months - and I’m always anxious 
to learn the nuances of the boat.  It came with a large selection of very nice 
sails (6) and my first attempts at sailing her went very well and I was solo.  
While new at sailing boats I have a lifetime of using the wind for power with 
over 30 years as a hang glider pilot, wind surfer, and paraglider pilot.  So 
it’s learning the mechanics of how best to set sails; at this point the proper 
way of raising the sails.  I’m taking ASA sailing lessons in April which should 
show me some of the equipment that I’m not familiar with.  If you have any 
words of wisdom aside from sitting in a bar in Antigua, sounds so nice, I 
surely appreciate it.

Kind Regards,

Dan Utinske
C&C 26'




Dan


On Tuesday, January 27, 2015 at 1:00 PM, Sam Salter via CnC-List wrote:

> ‎I'm sitting here in a bar on the dock in Jolly Harbour, Antigua.  
> The boat we’re sailing doesn't have one and I must admit I didn't miss it - 
> you can work around it and the sailing priorities are different.  
> But I have one on the 26 and I have a jack line.
> I wouldn't be without it! I use it all the time to bring the draft forward 
> without cupping the leech. If you're racing, it allows the draft to be 
> brought forward without going above the black line.
> That's all - I need another gin and tonic.
>  
> Sam :-)  
> _______________________________________________
>  
> Email address:
> CnC-List@cnc-list.com (mailto:CnC-List@cnc-list.com)
> To change your list preferences, including unsubscribing -- go to the bottom 
> of page at:
> http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
>  
>  


_______________________________________________

Email address:
CnC-List@cnc-list.com
To change your list preferences, including unsubscribing -- go to the bottom of 
page at:
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com

Reply via email to