I have a Forespar carbon fiber extendable spinnaker/whisker pole on Honey It weighs twice what the aluminum pole weighs and when said and done with end fittings etc it cost me right at USD4,000 through Port Supply Jack Fitzgerald Honey C&C 39TM Savannah GA USA
Sent from my iPhone > On Apr 25, 2015, at 10:48, Bill Coleman via CnC-List <cnc-list@cnc-list.com> > wrote: > > I have a carbon pole on the mast, & I wouldn't do it any other way. It is so > slick to deploy, and completely out of the way. > > > > Bill Coleman > C&C 39 > > > -------- Original message -------- > From: "svpegasu...@gmail.com via CnC-List" <cnc-list@cnc-list.com> > Date: 04/24/2015 5:03 PM (GMT-05:00) > To: cnc-list@cnc-list.com > Subject: Re: Stus-List Spinnaker pole storage > > Pegasus had the pole deck stowed. I moved it to the rail, aft chock is inside > of stantion, fwd chock os on outside of aft bow pulpit stantion. So far I > have not had an issue wit lines getting tangled. > > Doug Mountjoy > svPegasus > LF38 > just west of Ballard, WA. > ------ Original message------ > From: Joel Aronson via CnC-List > Date: Fri, Apr 24, 2015 12:35 > To: cnc-list@cnc-list.com; > Subject:Stus-List Spinnaker pole storage > My seldom used spin pole is in deck chocks along the starboard rail. Just > something else to trip over. > > Has anyone used the rail-mounted chocks? Any other solution (other than the > mast)? > > Joel > > The Office > Annapolis > _______________________________________________ > > Email address: > CnC-List@cnc-list.com > To change your list preferences, including unsubscribing -- go to the bottom > of page at: > http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com >
_______________________________________________ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com