Edd, Your M-35 is a marinized Kubota tractor engine. You might contact a tractor mechanic about rebuilding it. Seems to me a rebuild should be in the $3000-3500 range. A new one would be north of $7-8K.
I handled a complete rebuild on an M-30 a while back. I got most of the parts from a Kubota tractor dealer. Somewhere there is a cross reference for parts using the serial number off the block. I took the head and block and the bearings, rings, etc. to a regular engine machine shop. They built the block, rebuilt the head and installed the head. All I had to do was install the heat exchanger and a few other goodies and drop it back in the boat. That M-30 is still going strong. Dennis C. Touche' 35-1 #83 Mandeville, LA On Sun, Jun 21, 2015 at 11:45 AM, Edd Schillay via CnC-List < cnc-list@cnc-list.com> wrote: > Listers, > > Having some troubles with the Enterprise's Universal M-35 Diesel engine > and I'm preparing myself for the worst. > > Has anyone on the list completely replaced their engine and, if so, what > did it cost you including time out of commission and labor? > > > All the best, > > Edd > > ------------------------------- > Edd M. Schillay > Starship Enterprise > NCC-1701-B > C&C 37+ | City Island, NY > www.StarshipSailing.com > ------------------------------- > 914.332.4400 | Office > 914.774.9767 | Mobile > ------------------------------- > Sent via iPhone 6 > iPhone. iTypos. iApologize > > _______________________________________________ > > Email address: > CnC-List@cnc-list.com > To change your list preferences, including unsubscribing -- go to the > bottom of page at: > http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com > > >
_______________________________________________ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
