Hi Kurt,
Not everyone is using a tri-colour at the
masthead but it is practical in that, when
sailing, there is nothing to obscure the lower
lights and one lamp can draw a lot less power than three or four lamps.
Note, if you are motoring then you still need the forward steaming light, etc.
Rule 25 (around page 80) if you're interested.
http://www.navcen.uscg.gov/pdf/navrules/navrules.pdf
Cheers, Russ
Sweet 35-1
At 04:50 PM 22/08/2015, you wrote:
Is there a reason every one is using tri colors
at the mast head? Is this in addition to the
regular side lights and stern light
From: Jean-Francois J Rivard via CnC-List <cnc-list@cnc-list.com>;
To: <cnc-list@cnc-list.com>;
Cc: Jean-Francois J Rivard <jfriv...@us.ibm.com>; <a...@airsensing.com>;
Subject: Stus-List Was Wire Gauge, now Where can I get LED?
Sent: Sat, Aug 22, 2015 5:10:19 PM
Hello Alex,
I am replacing the cabin lights with this one
from Marinebeam:
<http://store.marinebeam.com/bayonet-ba15s-15-led-bayonet-mini-tower/>http://store.marinebeam.com/bayonet-ba15s-15-led-bayonet-mini-tower/
Itâs just bright enough. I tried the 18 and
21 led models too. Theyâre a bit much.. The
18 is good as a reading light, the 21 is the
master blaster at the chart table.
My sternlight burned-out about a month ago. I
did not bother looking for a replacement bulb at Marinebeam..
I bought this for 16 bucks instead
<http://www.amazon.com/gp/product/B00I0BPZ1U?psc=1&redirect=true&ref_=oh_aui_detailpage_o06_s00>http://www.amazon.com/gp/product/B00I0BPZ1U?psc=1&redirect=true&ref_=oh_aui_detailpage_o06_s00
My original fixtureâs lens was all crazed and
the housing was getting brittle
Now itâs all
fresh and nnew. Itâs well done too watertight
with O-rings and extremely bright as it is a 12 led array.
For the tricolor I splurged a little..
<http://www.westmarine.com/buy/misea--led-navigation-light-tri-color-anchor-lights--P013836226>http://www.westmarine.com/buy/misea--led-navigation-light-tri-color-anchor-lights--P013836226
Itâs a bit pricey but itâs the catâs
a$$. Super bright, high quality machined metal
housing, no interference with the VHF, automatic
anchor light, and a killer white light
illuminating the Windex. You get what you pay for I guess..
I also have a remote control battery powered LED
bar light for the engine compartment. It's
about 20 bucks at Walmart. It's a peel and stick
installation and the light switch is also peel
and stick. No wiring. Simple and perfect for
the engine compartment, the remote switch is
nice. I am planning on buying more of those
<http://www.walmart.com/ip/GE-17528-GE-Under-Cabinet-Light-Fixture-12/21827156?action=product_interest&action_type=title&item_id=21827156&placement_id=irs-106-t1&strategy=PWVUB&visitor_id&category=&client_guid=f3f3b215-f1f0-45be-becb-07836d61e0e0&customer_id_enc&config_id=106&parent_item_id=16561412&parent_anchor_item_id=16561412&guid=66bb66bb-45f0-42b5-9d01-a888a0a07fc4&bucket_id=irsbucket003&beacon_version=1.0.1&findingMethod=p13n>http://www.walmart.com/ip/GE-17528-GE-Under-Cabinet-Light-Fixture-12/21827156?action=product_interest&action_type=title&item_id=21827156&placement_id=irs-106-t1&strategy=PWVUB&visitor_id&category=&client_guid=f3f3b215-f1f0-45be-becb-07836d61e0e0&customer_id_enc&config_id=106&parent_item_id=16561412&parent_anchor_item_id=16561412&guid=66bb66bb-45f0-42b5-9d01-a888a0a07fc4&bucket_id=irsbucket003&beacon_version=1.0.1&findingMethod=p13n
-Francois Rivard
1990 34+ "Take Five"
Cumming, GA
From: Alex Giannelia via CnC-List <mailto:cnc-list@cnc-list.com>
Sent: Thursday, August 20, 2015 12:12 PM
To: cnc-list@cnc-list.com
Cc: Alex Giannelia <mailto:a...@airsensing.com>
Subject: Stus-List Was Wire Gauge, now Where can I get LED?
So,
I recently installed a PERKO masthead tri-light
and want to know if one can insert a replacement
LED trilight. I understand that with the narrow
spectrum range of some LED?s, I might not be
able to insert a replacement white light LED but
would need some kind of tri-light bulb.
What have others done for their masthead tri-lights?
Thanks,
Alex Giannelia
a...@airsensing.com <mailto:a...@airsensing.com>
(416) 203-9858
_______________________________________________
Email address:
CnC-List@cnc-list.com
To change your list preferences, including
unsubscribing -- go to the bottom of page at:
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
_______________________________________________
Email address:
CnC-List@cnc-list.com
To change your list preferences, including unsubscribing -- go to the bottom of
page at:
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com