Lights that look like AquaSignal 25s with build in LEDs are all over FleaBay if you look.
Joe Della Barba j...@dellabarba.com <mailto:j...@dellabarba.com> Coquina From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Marek Dziedzic via CnC-List Sent: Saturday, August 22, 2015 9:01 AM To: cnc-list@cnc-list.com Cc: Marek Dziedzic <dziedzi...@hotmail.com> Subject: Re: Stus-List Was Wire Gauge, now Where can I get LED? I did exactly that. The festoon (dimpled) replacement bulb. Make sure that the length of the bulb is correct (they come in many variants). Marek From: Indigo via CnC-List <mailto:cnc-list@cnc-list.com> Sent: Friday, August 21, 2015 10:33 PM To: cnc-list@cnc-list.com <mailto:cnc-list@cnc-list.com> Cc: Indigo <mailto:ind...@thethomsons.us> Subject: Re: Stus-List Was Wire Gauge, now Where can I get LED? Being totally ignorant on this topic, can someone tell me if there is an LED that fits the Aquasignal 25 stern light - and is it just a simple task of taking the old incandescent bulb out and replacing with the LED or something more complex? I need to replace the lens on my stern light - no replacement parts available so have to buy a complete unit and thought I might switch to LED at the same time. -- Jonathan Indigo C&C 35III SOUTHPORT CT On Aug 20, 2015, at 16:24, Marek Dziedzic via CnC-List <cnc-list@cnc-list.com <mailto:cnc-list@cnc-list.com> > wrote: I cannot say anything about your tricolour, but I have a white LED in the combination red/green bow light on my boat. It certainly shows the right colours through the lens. But this may (will?) depend on the lens and the LED. Marek From: Alex Giannelia via CnC-List <mailto:cnc-list@cnc-list.com> Sent: Thursday, August 20, 2015 12:12 PM To: cnc-list@cnc-list.com Cc: Alex Giannelia <mailto:a...@airsensing.com> Subject: Stus-List Was Wire Gauge, now Where can I get LED? So, I recently installed a PERKO masthead tri-light and want to know if one can insert a replacement LED trilight. I understand that with the narrow spectrum range of some LED’s, I might not be able to insert a replacement white light LED but would need some kind of tri-light bulb. What have others done for their masthead tri-lights? Thanks, Alex Giannelia a...@airsensing.com <mailto:a...@airsensing.com> (416) 203-9858 _____ _______________________________________________ Email address: CnC-List@cnc-list.com <mailto:CnC-List@cnc-list.com> To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com _______________________________________________ Email address: CnC-List@cnc-list.com <mailto:CnC-List@cnc-list.com> To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com _____ _______________________________________________ Email address: CnC-List@cnc-list.com <mailto:CnC-List@cnc-list.com> To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
_______________________________________________ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
