Read the instructions! This is how most of the world, including your
local battery dealer, load tests batteries. LOL
Bill Bina
On 2/7/2017 2:06 PM, Della Barba, Joe wrote:
I have one of those. It draws 5 times the current desired AND would
likely catch on fire or burn something up if left on for long. It is a
1200 watt heater with no fan!
Joe
Coquina
*From:*CnC-List [mailto:cnc-list-boun...@cnc-list.com] *On Behalf Of
*Bill Bina - gmail via CnC-List
*Sent:* Tuesday, February 07, 2017 12:07
*To:* cnc-list@cnc-list.com
*Cc:* Bill Bina - gmail <billbinal...@gmail.com>
*Subject:* Re: Stus-List Battery test
http://www.harborfreight.com/100-amp-612v-battery-load-tester-61747.html
Bill Bina
On 2/7/2017 11:54 AM, Ron Ricci via CnC-List wrote:
Dave,
If you used a resistor, you’d need 0.6 ohms at least 240 watts.
Probably not practical. You could put a load on your batteries by
turning on most of your lights, cabin fans and other loads.
Ron
*From:*CnC-List [mailto:cnc-list-boun...@cnc-list.com] *On Behalf
Of *David Knecht via CnC-List
*Sent:* Tuesday, February 7, 2017 11:32 AM
*To:* CnC CnC discussion list
*Cc:* David Knecht
*Subject:* Re: Stus-List Battery test
I have been following this discussion and would like to do this
for my batteries. Can you suggest what would be an
easy/appropriate ~20A load generating device? Dave
Aries
1990 C&C 34+
New London, CT
cid:image001.png@01D28138.02844420
.
_______________________________________________
This list is supported by the generous donations of our members. If you wish to
make a contribution to offset our costs, please go to:
https://www.paypal.me/stumurray
All Contributions are greatly appreciated!