Dave, I commend you for being able to budge the anode with the heater still in place. I tried and failed. I managed to do it only after the heater was out of the boat.
Happy New Year! Marek From: CnC-List <cnc-list-boun...@cnc-list.com> On Behalf Of David Knecht via CnC-List Sent: Wednesday, January 2, 2019 10:17 To: CnC CnC discussion list <cnc-list@cnc-list.com> Cc: David Knecht <davidakne...@gmail.com> Subject: Re: Stus-List replacing anodes Then I pulled out my bigger wrench to try. It was very difficult to find an angle to get it on in a place I could pull on, but finally managed and low and behold, it finally budged. I thought I was going to pull the whole water heater off its mount, but the threads gave first. I was then able to remove it iwth the smaller wrench and will replace in the spring. So Marek and Josh get bonus points for that suggestion if we are keeping track.
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
