I thought about suggesting Paul however Dan seems to be a DIYer. Paul can certainly provide good advice if you have any questions Dan.

Mike, my brother was racing on that J120 when the bow sprit let go under load and blew back through the bulkhead.....ugly!

Rob Abbott
AZURA
C&C 32 - #277
Halifax, N.S.

On 2019-01-30 9:21 a.m., Hoyt, Mike via CnC-List wrote:

Hi Dan

You may wish to contact Paul Gallant of Gallant Marine Services.  He lives in Spinnaker Arms area very near you. Last off season he replaced a similar bulkhead in a J120 that separates the anchor locker from the vee berth.  He may be willing to take a look and provide advice.  This is Paul’s specialty.  Contact me off list and I can give you Paul’s number

Mike

Persistence

Halifax, NS

www.hoytsailing.com

On 2019-01-29 12:48 p.m., Dan via CnC-List wrote:

    I need the collective wisdom on this one.

    Pictures here:

    *IMG_6750.JPG
    
<https://drive.google.com/file/d/1znDiTdnSAfj89gETGSYAzGlTGPaJPGLM/view?usp=drive_web>*

    *IMG_6747.JPG
    
<https://drive.google.com/file/d/1A8ykQQMEgWAVr-Y3Dd5oxvPRXd_tMdMX/view?usp=drive_web>*

    On Breakaweigh I discovered my forward bulkhead holding the chain
    plate for the headstay was constructed using a plywood core and
    had been modified over the years. Of course no one thought to
    isolate the core in there when drain holes were drilled and such
    and now the core material inside the bulkhead is nearly
    disintegrated or rotten. There is a front and back fiberglass
    layer, each about 1/4" thick and are well tabbed into the hull.

    This rot is making me damn nervous and my gut is telling me to cut
    into the exposed side, remove the rot, clean it up, sand, etc. and
    re-bed in something stronger than wood, then re-glass and re-tab
    it into the hull.

    Before I try anything like that I'm just wondering if cutting then
    re-glassing one side of these original hull tabs is a bad idea?
    will the new tabs be strong enough to support the re-inforced
    bulkhead? (using good quality glass and epoxy)

    Thanks guys,

    Dan

    Breakaweigh

    C&C44

    Halifax, NS



    _______________________________________________

    Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --https://www.paypal.me/stumurray


_______________________________________________

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray


_______________________________________________

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Reply via email to