I am surprized to read that, on mine ( 1975 ) the tube is aluminum and the
fitting to connect to the rubber post looks like cast aluminum, held in place
by a 1/2 in bolt. I taped an open 1/2 in key to the tube so I can tighten it
appropriately in a short time.Tried it once, it fits well and make a good backup
SylvainC&C27 MkIII
On Friday, March 20, 2020, 12:29:08 PM EDT, Dennis C. via CnC-List
<cnc-list@cnc-list.com> wrote:
The cast aluminum tiller head fitting on my previous 27 foot boat broke.
Fortunately I was in the marina and not far from my slip. I clamped a large
pair of Vise Grips on what was left of the fitting to get into the slip. It
wasn't easy.
Dennis C.
_______________________________________________
Thanks everyone for supporting this list with your contributions. Each and
every one is greatly appreciated. If you want to support the list - use PayPal
to send contribution -- https://www.paypal.me/stumurray
_______________________________________________
Thanks everyone for supporting this list with your contributions. Each and
every one is greatly appreciated. If you want to support the list - use PayPal
to send contribution -- https://www.paypal.me/stumurray
