Hi,Not sure if they are the same as in my 1975 27 but if so you can order the 
kit  from Holland Marine Product or Southshore yacht 
There's the grey for the outside and a high density foam gasket for the inside 
, you don't need to remove the frame.
Sylvain C&C27MkIII

    On Sunday, May 17, 2020, 5:57:03 PM EDT, Shawn Wright via CnC-List 
<cnc-list@cnc-list.com> wrote:  
 
 How about the 70s vintage aluminum framed portlights? I understand I will need 
new rubber inserts (Catalina direct has been suggested, but not sure if there 
is a source in Canada?), but is Dow 795 also suitable for the frame to deck 
seal?
I'm thinking I will fill the void between the deck and liner with epoxy, after 
stuffing a foam gasket around the joint and inward about 3/4" to contain the 
epoxy, so there is a stiffer surface. From the factory there were wooden shims 
and a few gobs of epoxy or similar, but most of the void is wide open.
I know I could upgrade to newer portlights, or maybe try to go frameless, but 
want to keep the look of the original if I can make it work well. I was 
thinking of buffing the frames to a shine, although not sure how long it would 
last...
--Shawn wrightshawngwri...@gmail.coms/V Callisto, 1974 C&C 
35https://www.facebook.com/SVCallisto


On Sat, May 16, 2020 at 3:37 PM Peter Cowenhoven via CnC-List 
<cnc-list@cnc-list.com> wrote:

Tom,
Same concept here and this guy is a professional....I think.
https://youtu.be/MQyjxVUskd8

Landfall 35Westbrook, CT
Sent from Yahoo Mail on Android 
 
  On Sat, May 16, 2020 at 6:15 PM, Peter Cowenhoven via 
CnC-List<cnc-list@cnc-list.com> wrote:   
_______________________________________________

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --  https://www.paypal.me/stumurray

  
_______________________________________________

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray


_______________________________________________

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --  https://www.paypal.me/stumurray

  
_______________________________________________

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Reply via email to