I think the Barient 27s are measured somehow differently than Lewmar; they're roughly equivalent to a Lewmar 40, size-wise. What size boat do you have? Anybody have a good size comparison tool across winch brands?
On Tue, Jul 14, 2020 at 11:16 AM Matt Wolford via CnC-List < cnc-list@cnc-list.com> wrote: > Sadly, it has been too long for me to remember what we did. I serviced > all the winches on my boat several years ago – okay, everybody, you can > chastise me now. I chuckled when I read that your boat uses size 27 for > your primaries. I use mine for my spin pole topping lift. > > > > *From:* CnC-List <cnc-list-boun...@cnc-list.com> *On Behalf Of *Andrew > Means via CnC-List > *Sent:* Tuesday, July 14, 2020 2:05 PM > *To:* cnc-list@cnc-list.com > *Cc:* Andrew Means <andrew.cnc...@gmail.com> > *Subject:* Re: Stus-List Barient 27 winch servicing - still squeaks! > > > > Thanks Matt! I'll try some penetrating oil and see where it gets me. When > you got the lifter arm off were you able to adjust the height so it no > longer rubbed against the clamp ring? Or were you able to lubricate it a > bit so it didn't squeak? > > > > Andrew > > > > On Tue, Jul 14, 2020 at 10:30 AM Matt Wolford via CnC-List < > cnc-list@cnc-list.com> wrote: > > Yes and yes. I eventually got it off, but I can’t recall now how I did it > (it was a while ago). Try using some penetrating oil and let it sit before > hitting it again. I’ll take a look at mine and see if I can recall > anything else I may have done. > > > > *From:* CnC-List <cnc-list-boun...@cnc-list.com> *On Behalf Of *Andrew > Means via CnC-List > *Sent:* Tuesday, July 14, 2020 1:07 PM > *To:* cnc-list@cnc-list.com > *Cc:* Andrew Means <andrew.cnc...@gmail.com> > *Subject:* Stus-List Barient 27 winch servicing - still squeaks! > > > > Hi all - > > > > The two Barient 27 primary winches on the Safari were in sorry shape, so > last week I decided to service them. After a rather protracted battle I was > able to disassemble and clean/oil/grease one of them to my satisfaction, > however - when reassembling the first winch I realized that, while > definitely smoother internal operations, it still squeaks! > > > > I think I've traced it to the line lifter rubbing on the clamp ring (see > manual here > <http://svsoggypaws.com/files/Winches/Barient%2027%20ST%20Winch%20Service%20Manual.pdf>). > I didn't think I needed to remove the line lifter originally, but after > tracing the squeak there I wasn't able to unscrew it (the manual says to > tap it with a soft hammer - hitting it rather hard with a soft hammer > didn't help either). > > > > Does anyone else have these winches on their boat? Anybody else had this > problem? > > > > Andrew > > _______________________________________________ > > Thanks everyone for supporting this list with your contributions. Each > and every one is greatly appreciated. If you want to support the list - > use PayPal to send contribution -- https://www.paypal.me/stumurray > > _______________________________________________ > > Thanks everyone for supporting this list with your contributions. Each > and every one is greatly appreciated. If you want to support the list - > use PayPal to send contribution -- https://www.paypal.me/stumurray > >
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
