As I recall I was able to successfully eliminate the squeal by removing the spacer plate in my 22ST. I'll investigate again.
Josh On Tue, Jul 14, 2020, 15:45 Andrew Means via CnC-List <cnc-list@cnc-list.com> wrote: > Josh I thought that was the issue as well (and the screws have definitely > rubbed at some point in the past) but after adjusting the screws to make > sure they weren't rubbing I still hear the squeak. > > On Tue, Jul 14, 2020 at 12:25 PM Josh Muckley via CnC-List < > cnc-list@cnc-list.com> wrote: > >> I misspoke... The line lifter was the wrong term. I meant the pressure >> plate. >> >> On Tue, Jul 14, 2020, 15:17 Josh Muckley <muckl...@gmail.com> wrote: >> >>> The screws that hold the spring tension on the line lifter are too tight >>> and are rubbing on the bronze spindle below. A series of small washers or >>> grinding of the screws short will most likely fix the problem. >>> >>> All the best, >>> Josh Muckley >>> S/V Sea Hawk >>> 1989 C&C 37+ >>> Solomons, MD >>> >>> >>> >>> On Tue, Jul 14, 2020, 13:08 Andrew Means via CnC-List < >>> cnc-list@cnc-list.com> wrote: >>> >>>> Hi all - >>>> >>>> The two Barient 27 primary winches on the Safari were in sorry shape, >>>> so last week I decided to service them. After a rather protracted battle I >>>> was able to disassemble and clean/oil/grease one of them to my >>>> satisfaction, however - when reassembling the first winch I realized that, >>>> while definitely smoother internal operations, it still squeaks! >>>> >>>> I think I've traced it to the line lifter rubbing on the clamp ring >>>> (see manual here >>>> <http://svsoggypaws.com/files/Winches/Barient%2027%20ST%20Winch%20Service%20Manual.pdf>). >>>> I didn't think I needed to remove the line lifter originally, but after >>>> tracing the squeak there I wasn't able to unscrew it (the manual says to >>>> tap it with a soft hammer - hitting it rather hard with a soft hammer >>>> didn't help either). >>>> >>>> Does anyone else have these winches on their boat? Anybody else had >>>> this problem? >>>> >>>> Andrew >>>> _______________________________________________ >>>> >>>> Thanks everyone for supporting this list with your contributions. Each >>>> and every one is greatly appreciated. If you want to support the list - >>>> use PayPal to send contribution -- https://www.paypal.me/stumurray >>>> >>>> _______________________________________________ >> >> Thanks everyone for supporting this list with your contributions. Each >> and every one is greatly appreciated. If you want to support the list - >> use PayPal to send contribution -- https://www.paypal.me/stumurray >> >> _______________________________________________ > > Thanks everyone for supporting this list with your contributions. Each > and every one is greatly appreciated. If you want to support the list - > use PayPal to send contribution -- https://www.paypal.me/stumurray > >
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
