I seem to remember reading the Barient size meant hundreds of pounds of design load. A "27" is designed for 2700 pounds of load. A "28" is designed for 2800 pounds of load.
> On 07/14/2020 2:49 PM Andrew Means via CnC-List <cnc-list@cnc-list.com> > wrote: > > > I think the Barient 27s are measured somehow differently than Lewmar; > they're roughly equivalent to a Lewmar 40, size-wise. What size boat do you > have? Anybody have a good size comparison tool across winch brands? > > On Tue, Jul 14, 2020 at 11:16 AM Matt Wolford via CnC-List < > cnc-list@cnc-list.com mailto:cnc-list@cnc-list.com > wrote: > > > > > > Sadly, it has been too long for me to remember what we did. I > > serviced all the winches on my boat several years ago – okay, everybody, > > you can chastise me now. I chuckled when I read that your boat uses size > > 27 for your primaries. I use mine for my spin pole topping lift. > > > > > > > > From: CnC-List <cnc-list-boun...@cnc-list.com > > mailto:cnc-list-boun...@cnc-list.com > On Behalf Of Andrew Means via > > CnC-List > > Sent: Tuesday, July 14, 2020 2:05 PM > > To: cnc-list@cnc-list.com mailto:cnc-list@cnc-list.com > > Cc: Andrew Means <andrew.cnc...@gmail.com > > mailto:andrew.cnc...@gmail.com > > > Subject: Re: Stus-List Barient 27 winch servicing - still squeaks! > > > > > > > > Thanks Matt! I'll try some penetrating oil and see where it gets > > me. When you got the lifter arm off were you able to adjust the height so > > it no longer rubbed against the clamp ring? Or were you able to lubricate > > it a bit so it didn't squeak? > > > > > > > > Andrew > > > > > > > > On Tue, Jul 14, 2020 at 10:30 AM Matt Wolford via CnC-List > > <cnc-list@cnc-list.com mailto:cnc-list@cnc-list.com > wrote: > > > > > > > > > > Yes and yes. I eventually got it off, but I can’t recall now > > > how I did it (it was a while ago). Try using some penetrating oil and > > > let it sit before hitting it again. I’ll take a look at mine and see if > > > I can recall anything else I may have done. > > > > > > > > > > > > From: CnC-List <cnc-list-boun...@cnc-list.com > > > mailto:cnc-list-boun...@cnc-list.com > On Behalf Of Andrew Means via > > > CnC-List > > > Sent: Tuesday, July 14, 2020 1:07 PM > > > To: cnc-list@cnc-list.com mailto:cnc-list@cnc-list.com > > > Cc: Andrew Means <andrew.cnc...@gmail.com > > > mailto:andrew.cnc...@gmail.com > > > > Subject: Stus-List Barient 27 winch servicing - still squeaks! > > > > > > > > > > > > Hi all - > > > > > > > > > > > > The two Barient 27 primary winches on the Safari were in > > > sorry shape, so last week I decided to service them. After a rather > > > protracted battle I was able to disassemble and clean/oil/grease one of > > > them to my satisfaction, however - when reassembling the first winch I > > > realized that, while definitely smoother internal operations, it still > > > squeaks! > > > > > > > > > > > > I think I've traced it to the line lifter rubbing on the > > > clamp ring (see manual here > > > http://svsoggypaws.com/files/Winches/Barient%2027%20ST%20Winch%20Service%20Manual.pdf > > > ). I didn't think I needed to remove the line lifter originally, but > > > after tracing the squeak there I wasn't able to unscrew it (the manual > > > says to tap it with a soft hammer - hitting it rather hard with a soft > > > hammer didn't help either). > > > > > > > > > > > > Does anyone else have these winches on their boat? Anybody > > > else had this problem? > > > > > > > > > > > > Andrew > > > > > > _______________________________________________ > > > > > > Thanks everyone for supporting this list with your > > > contributions. Each and every one is greatly appreciated. If you want > > > to support the list - use PayPal to send contribution -- > > > https://www.paypal.me/stumurray > > > > > > > > _______________________________________________ > > > > Thanks everyone for supporting this list with your contributions. > > Each and every one is greatly appreciated. If you want to support the list > > - use PayPal to send contribution -- https://www.paypal.me/stumurray > > > > > > > _______________________________________________ > > Thanks everyone for supporting this list with your contributions. Each > and every one is greatly appreciated. If you want to support the list - use > PayPal to send contribution -- https://www.paypal.me/stumurray > >
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray