Hi Adam
The masthead on mine is also welded completely, the axles for the
sheaves come out the sides. Assuming yours is the same, on the side
there will be a little stainless plate screwed onto the mast, get an
impact driver to use to get the screw out and then give the stainless
plate a twist with some pliers. It should come out, which will free up
the sheaves. My boom is the built the same way.
Graham Collins
Secret Plans
C&C 35-III #11
On 2021-01-30 6:30 p.m., Adam Hayden via CnC-List wrote:
This is a timely post. How do you access the sheaves at the top of
the mast? My masthead is welded completely. I have seen other masts
where the top plate is bolted on.
Adam
C&C 36
Pictou NS
Thanks to all of the subscribers that contributed to the list to help with the
costs involved. If you want to show your support to the list - use PayPal to
send contribution -- https://www.paypal.me/stumurray Thanks - Stu
Thanks to all of the subscribers that contributed to the list to help with the
costs involved. If you want to show your support to the list - use PayPal to
send contribution -- https://www.paypal.me/stumurray Thanks - Stu
