I can't recall exactly but if you asked me how much oil I buy in preps for an oil change I would have said 6 qts without even thinking about it. I use a hand vacuum pump but can't recall it's capacity. As I recall it was the larger of the 2 Moeller models at the time when I bought it. The suction hoses have a metal rod inside which allows you to pre-bend the tube to better suck hard to reach area.
Josh Muckley S/V Sea Hawk 1989 C&C 37+ Yanmar 3HM35F Solomons, MD On Sun, May 16, 2021, 20:18 Tom Buscaglia via CnC-List < cnc-list@cnc-list.com> wrote: > Every time I change oil on Alera I check the engine spec for the Yanmar 3HM35F > that calls for 5.7 quarts. I have never been able to get more than 4 > quarts out or in. > > I use an electric pump extractor via the dip stick hole. I understand > that the angle of the engine on my 37+ results in the oil laying at the aft > end of the pan and try to make sure the tube gats all the way back there. > > Anyone else been able to replace over 4 quarts! > > Tom Buscaglia > S/V Alera > 1990 C&C 37+/40 > Vashon WA > P 206.463.9200 > C 305.409.3660 > > Thanks to all of the subscribers that contributed to the list to help with > the costs involved. If you want to show your support to the list - use > PayPal to send contribution -- https://www.paypal.me/stumurray Thanks > - Stu
Thanks to all of the subscribers that contributed to the list to help with the costs involved. If you want to show your support to the list - use PayPal to send contribution -- https://www.paypal.me/stumurray Thanks - Stu