I have a RAM mount on the pedestal guard, but rarely rotate the plotter. Joel
On Fri, Dec 3, 2021 at 8:33 AM Della Barba, Joe via CnC-List < cnc-list@cnc-list.com> wrote: > I have a plotter at the helm of my 35 MK I. It faces aft, if I want to > navigate from forward, like I do about 90% of the time, I look at the > computer on the chart table or SeaIQ/Navionics on my iPad. > If I rotated the helm plotter sideways I think the mainsheet would get it. > > Joe Della Barba > Coquina > 73 C&C 35 MK I > > > -----Original Message----- > From: Bob Mann via CnC-List <cnc-list@cnc-list.com> > Sent: Thursday, December 2, 2021 8:21 PM > To: Stus-List <cnc-list@cnc-list.com> > Cc: Bob Mann <sailrm...@comcast.net> > Subject: [EXTERNAL] Stus-List mounting chart plotter at helm > > I was going to put another instrument display at the helm of my 35 mk I, > but realized a chartplotter was only a couple hundred more so went that > route. > > Any suggestions on how to mount it to my Edson pedestal so I can rotate it > sideways, for easy viewing from the coaming? I rarely steer from behind the > wheel so I want to see it from the sides. The pedestal is about the same > height as the wheel (not my boat, but similar setup. I don't have the top > tray): https://i44.servimg.com/u/f44/17/14/05/22/2012-110.jpg) > > The chartplotter is the B&G Vulcan 9. > > regards, > Bob Mann > Thanks to all of the subscribers that contributed to the list to help with > the costs involved. If you want to show your support to the list - use > PayPal to send contribution -- https://www.paypal.me/stumurray Thanks > - Stu > Thanks to all of the subscribers that contributed to the list to help with > the costs involved. If you want to show your support to the list - use > PayPal to send contribution -- https://www.paypal.me/stumurray Thanks > - Stu > -- Joel
Thanks to all of the subscribers that contributed to the list to help with the costs involved. If you want to show your support to the list - use PayPal to send contribution -- https://www.paypal.me/stumurray Thanks - Stu
