Sounds good!
Will consider too...
Mon, 17 May 2010 22:24:11 +0700 письмо от Dmytro Sheyko
<dmytro_she...@hotmail.com>:
> Hi,
>
> Regarding counting sort. We can check whether we should switch to counting
> sort only once in the beginning.
>
> > Date: Mon, 17 May 2010 17:30:37 +0400
> > From: iaroslav...@mail.ru
> > Subject: Re: New portion of improvements for Dual-Pivot Quicksort
> > To: dmytro_she...@hotmail.com
> > CC: core-libs-dev@openjdk.java.net
> >
> > Hello,
> >
> > Thank you for review, I'll check and run tests again with you changes.
> >
> > Thank you,
> > Vladimir
> >
> > Dmytro Sheyko wrote:
> > > Hello,
> > >
> > > More ideas.
> > >
> > > 1. We can use
> > > Double.doubleToRawLongBits instead of Double.doubleToLongBits and
> > > Float.floatToRawIntBits instead of Float.floatToIntBits.
> > > No need to handle NaN's because they all are placed to the end of array.
> > >
> > > 2. Note that
> > > Double.doubleToRawLongBits(+0.0) == 0L and
> > > Double.doubleToRawLongBits(-0.0) == Long.MIN_VALUE and
> > > Float.floatToRawIntBits(+0.0) == 0 and
> > > Float.floatToRawIntBits(-0.0) == Integer.MIN_VALUE.
> > >
> > > Comparing with is zero usually more efficient (or at least not worse)
> > > than with other values. Thus such pattern
> > >
> > > if (ak == 0.0f && NEGATIVE_ZERO == Float.floatToIntBits(ak))
> > >
> > > can be replaced with
> > >
> > > if (ak == 0.0f && Float.floatToIntBits(ak) < 0)
> > >
> > > 3. It would be more efficient to count negative zeros after sorting.
> > > General sorting algorithm puts both negative and positive zeros together
> > > (but maybe not in right order).
> > > Therefore we have to process less elements because usually we have less
> > > zeros than other numbers.
> > >
> > > Thanks,
> > > Dmytro Sheyko
> > >
> > > > From: iaroslav...@mail.ru
> > > > To: dmytro_she...@hotmail.com; j...@google.com
> > > > CC: core-libs-dev@openjdk.java.net; iaroslav...@mail.ru
> > > > Subject: Re[6]: New portion of improvements for Dual-Pivot Quicksort
> > > > Date: Fri, 14 May 2010 23:54:06 +0400
> > > >
> > > > Hello,
> > > >
> > > > I've updated the class, please, review the changes.
> > > >
> > > > Vladimir
> > > >
> > > > Fri, 14 May 2010 01:48:11 +0700 письмо от Dmytro Sheyko
> > > <dmytro_she...@hotmail..com>:
> > > >
> > > > > Yes. I prefer F (Find First zero using binary search) over C (Count
> > > negatives) and S (Smart Scan for zero).
> > > > >
> > > > > > From: iaroslav...@mail.ru
> > > > > > To: dmytro_she...@hotmail.com
> > > > > > CC: j...@google.com; core-libs-dev@openjdk.java.net;
> > > iaroslav...@mail.ru
> > > > > > Subject: Re[4]: New portion of improvements for Dual-Pivot Quicksort
> > > > > > Date: Thu, 13 May 2010 21:34:54 +0400
> > > > > >
> > > > > > Dmytro,
> > > > > >
> > > > > > I've tested your suggested variants, and found that case "C"
> > > > > > (very interesting approach to find first position of zero
> > > > > > by counting negative elements) works slower than original
> > > > > > or two other cases.
> > > > > >
> > > > > > Implementations "F" and "S" are very close to each other
> > > > > > and little bit faster than original. I prefer case "F":
> > > > > > it is shorter and more clear. Do you agree?
> > > > > >
> > > > > > I'll prepare updated DualPivotQuicksort file and send it
> > > > > > tomorrow.
> > > > > >
> > > > > > Thank you,
> > > > > > Vladimir
> > > > > >
> > > > > > Wed, 12 May 2010 17:04:52 +0700 письмо от Dmytro Sheyko
> > > <dmytro_she...@hotmail.com>:
> > > > > >
> > > > > > > Vladimir,
> > > > > > >
> > > > > > > Your changes are good for me.
> > > > > > >
> > > > > > > Additionally I have some comments/proposals regarding dealing
> > > with negative zeros.
> > > > > > >
> > > > > > > 1. Scanning for the first zero we can avoid range check (i >=
> > > left) if we have at least one negative value.
> > > > > > > --- DualPivotQuicksort.java Tue May 11 09:04:19 2010
> > > > > > > +++ DualPivotQuicksortS.java Wed May 12 12:10:46 2010
> > > > > > > @@ -1705,10 +1705,15 @@
> > > > > > > }
> > > > > > >
> > > > > > > // Find first zero element
> > > > > > > - int zeroIndex = findAnyZero(a, left, n);
> > > > > > > + int zeroIndex = 0;
> > > > > > >
> > > > > > > - for (int i = zeroIndex - 1; i >= left && a[i] == 0.0f; i--) {
> > > > > > > - zeroIndex = i;
> > > > > > > + if (a[left] < 0.0f) {
> > > > > > > + zeroIndex = findAnyZero(a, left, n);
> > > > > > > +
> > > > > > > + // there is at least one negative value, so range check is
> > > not needed
> > > > > > > + for (int i = zeroIndex - 1; /*i >= left &&*/ a[i] == 0.0f; i--)
> > > > > > > {
> > > > > > > + zeroIndex = i;
> > > > > > > + }
> > > > > > > }
> > > > > > >
> > > > > > > // Turn the right number of positive zeros back into negative
> > > > > > > zeros
> > > > > > >
> > > > > > > 2. We can find the position of the first zero by counting
> > > negative values during preprocessing phase.
> > > > > > > --- DualPivotQuicksort.java Tue May 11 09:04:19 2010
> > > > > > > +++ DualPivotQuicksortC.java Wed May 12 12:01:24 2010
> > > > > > > @@ -1678,7 +1678,7 @@
> > > > > > > * Phase 1: Count negative zeros and move NaNs to end of array.
> > > > > > > */
> > > > > > > final int NEGATIVE_ZERO = Float.floatToIntBits(-0.0f);
> > > > > > > - int numNegativeZeros = 0;
> > > > > > > + int numNegativeZeros = 0, numNegativeValues = 0;
> > > > > > > int n = right;
> > > > > > >
> > > > > > > for (int k = left; k <= n; k++) {
> > > > > > > @@ -1689,6 +1689,8 @@
> > > > > > > } else if (ak != ak) { // i.e., ak is NaN
> > > > > > > a[k--] = a[n];
> > > > > > > a[n--] = Float.NaN;
> > > > > > > + } else if (ak < 0.0f) {
> > > > > > > + numNegativeValues++;
> > > > > > > }
> > > > > > > }
> > > > > > >
> > > > > > > @@ -1705,7 +1707,7 @@
> > > > > > > }
> > > > > > >
> > > > > > > // Find first zero element
> > > > > > > - int zeroIndex = findAnyZero(a, left, n);
> > > > > > > + int zeroIndex = numNegativeValues;
> > > > > > >
> > > > > > > for (int i = zeroIndex - 1; i >= left && a[i] == 0.0f; i--) {
> > > > > > > zeroIndex = i;
> > > > > > >
> > > > > > > 3. We can use binary search to find the first zero and thus
> > > avoid linear scan.
> > > > > > > --- DualPivotQuicksort.java Tue May 11 09:04:19 2010
> > > > > > > +++ DualPivotQuicksortF.java Wed May 12 12:03:58 2010
> > > > > > > @@ -1705,11 +1705,7 @@
> > > > > > > }
> > > > > > >
> > > > > > > // Find first zero element
> > > > > > > - int zeroIndex = findAnyZero(a, left, n);
> > > > > > > -
> > > > > > > - for (int i = zeroIndex - 1; i >= left && a[i] == 0.0f; i--) {
> > > > > > > - zeroIndex = i;
> > > > > > > - }
> > > > > > > + int zeroIndex = findFirstZero(a, left, n);
> > > > > > >
> > > > > > > // Turn the right number of positive zeros back into negative
> > > > > > > zeros
> > > > > > > for (int i = zeroIndex, m = zeroIndex + numNegativeZeros; i <
> > > m; i++) {
> > > > > > > @@ -1718,7 +1714,7 @@
> > > > > > > }
> > > > > > >
> > > > > > > /**
> > > > > > > - * Returns the index of some zero element in the specified
> > > range via
> > > > > > > + * Returns the index of the first zero element in the
> > > specified range via
> > > > > > > * binary search. The range is assumed to be sorted, and must
> > > contain
> > > > > > > * at least one zero.
> > > > > > > *
> > > > > > > @@ -1726,18 +1722,17 @@
> > > > > > > * @param low the index of the first element, inclusive, to be
> > > searched
> > > > > > > * @param high the index of the last element, inclusive, to be
> > > searched
> > > > > > > */
> > > > > > > - private static int findAnyZero(float[] a, int low, int high) {
> > > > > > > - while (true) {
> > > > > > > + private static int findFirstZero(float[] a, int low, int high) {
> > > > > > > + while (low < high) {
> > > > > > > int middle = (low + high) >>> 1;
> > > > > > > float middleValue = a[middle];
> > > > > > >
> > > > > > > if (middleValue < 0.0f) {
> > > > > > > low = middle + 1;
> > > > > > > - } else if (middleValue > 0.0f) {
> > > > > > > - high = middle - 1;
> > > > > > > - } else { // middleValue == 0.0f
> > > > > > > - return middle;
> > > > > > > + } else { // middleValue >= 0.0f
> > > > > > > + high = middle;
> > > > > > > }
> > > > > > > + return low;
> > > > > > > }
> > > > > > > }
> > > > > > >
> > > > > > > Counting negative values appeared more expensive than any other
> > > variants.
> > > > > > > The last proposal seems to me as efficient as the current
> > > solution is in its worst case - when we have only one negative zero (in
> > > the half of array).
> > > > > > > And it shows the best result if we have many zeros.
> > > > > > >
> > > > > > > Regards,
> > > > > > > Dmytro Sheyko
> > > > > > >
> > > > > > > > From: iaroslav...@mail.ru
> > > > > > > > To: j...@google.com; dmytro_she...@hotmail.com
> > > > > > > > CC: core-libs-dev@openjdk.java.net; iaroslav...@mail.ru
> > > > > > > > Subject: Re[2]: New portion of improvements for Dual-Pivot
> > > Quicksort
> > > > > > > > Date: Sun, 9 May 2010 23:51:27 +0400
> > > > > > > >
> > > > > > > > Josh,
> > > > > > > > Dmytro,
> > > > > > > >
> > > > > > > > I have done more thoroughly testing "great - less > 5 *
> > > seventh" vs. "less < e1 && great > e5",
> > > > > > > > and found that more symmetric code "less < e1 && great > e5"
> > > is little bit faster, ~0.5..0.7%
> > > > > > > > on both VMs. Other code has not been changed.
> > > > > > > >
> > > > > > > > Please, take the latest version in attachment.
> > > > > > > >
> > > > > > > > Vladimir
> > > > > > > >
> > > > > > > > Tue, 4 May 2010 21:57:42 -0700 письмо от Joshua Bloch
> > > <j...@google.com>:
> > > > > > > >
> > > > > > > > > Vladimir,
> > > > > > > > >
> > > > > > > > > Old:
> > > > > > > > >
> > > > > > > > >298 if (less < e1 && great > e5) {
> > > > > > > > >
> > > > > > > > > New:
> > > > > > > > >
> > > > > > > > >256 if (great - less > 5 * seventh) {
> > > > > > > >
> > > > > > > > >Regards,
> > > > > > > > >Josh
