----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----
In a message dated 10/10/01 1:51:22 AM Eastern Daylight Time, [EMAIL PROTECTED] writes: > Mine would > just quit dead with no prior notice. I think you're on the right track, but if the cause were ram air pressure, why would it occur suddenly, with no warning? Seems like it ought to happen predictably. If the carb were performing correctly, it ought to be able to compensate for the increased airflow, anyhow. My guess is that there's something a little off with the carb, like float level or restrictions in one of the jets. By restricting the air intake you're probably reducing slightly the available power, or at least that which would be available if everything were correct to start with. John ==^================================================================ EASY UNSUBSCRIBE click here: http://topica.com/u/?aVxiLm.aVzvvT Or send an email To: [EMAIL PROTECTED] This email was sent to: [EMAIL PROTECTED] T O P I C A -- Register now to manage your mail! http://www.topica.com/partner/tag02/register ==^================================================================
<<attachment: winmail.dat>>
