> > In your email to me, [EMAIL PROTECTED], you wrote: > > > > It's down to 3.3... Any other settings to jack with?? > > Make sure you have the shortest cable possible, and good termination. > Other than that, try another scsi cable. > > Tim > Thanks to all who have replied, but nothing has helped. I've got a 4 inch cable hooked up between the drive and the card now, but that didn't do it. The drive is a SCSI-III so I believe its a self-terminating device, but I don't know... Are there any terminators that would go on the end of a 50 pin ribbon? Anyway, I don't think the cabling is a problem. I ran a media verify from the onboard bios and it went through the whole drive with no problems, except for the usual media defects. I also did a dma transfer test from the bios and it came up clean. Are there any kernels that are known to work _for_sure_ with an AHA-1542CF?? Maybe that's my problem...
Mike