On 6/6/24 17:57, Tom Dial wrote:
On 6/5/24 19:53, gene heskett wrote:
On 6/5/24 17:25, Tom Dial wrote:
On 6/5/24 08:58, gene heskett wrote:
On 6/5/24 02:05, Tom Dial wrote:
On 6/4/24 04:26, gene heskett wrote:
On 2/19/22 06:31, Andrew M.A. Cater wrote:
Hi Gene,
If this was someone calling you from a TV station saying they had
a TV
transmitter that was varying in power output - you'd have a
mental checklist.
You'd get down there, perhaps schedule some sort of power down /
reduced
power operation and then you'd check - power supplies, feeder
cables, hot
spots on cables - whatever. Divide and conquer- working back to a
baseline
of known working conditions and eliminating causes.
My suggestion to you of a reinstall is partly designed to get you
out of this
"X happens, I did Y, now I've got Z" - to get to a known initial
state.
Take out all the serial converters to UPS, lathe and so on.
Wireless keyboard
doesn't present as serial in the same way that brltty does - if
it did, I'd
have brltty with every install on this laptop.
Copy off your home directory as you did before - maybe using
tar.gz and preserving permissions. Start with the .iso that
includes firmware - the unofficial one.
Build back slowly - do an expert text mode install if you can.
Then add your
Trinity desktop - I don't think any of us can help you there,
since we don't
run trinity.
Check and you should find that brltty isn't installed at all.
Then re-add thingsgradually until you have the working system you
want. Document it - write down
the steps you take / copy configuration files you change.
That will also reveal logging / login slowdowns or whatever
caused by
individual devices as you add them back. Keep a list as you go.
That's the counsel of perfection: alternatively:
apt rdepends brltty gives me:
me@mymachine:~$ apt rdepends brltty
brltty
Reverse Depends:
Suggests: speechd-el (>= 3.7.2)
Depends: brltty-espeak (= 6.3+dfsg-1+deb11u1)
Suggests: orca
Depends: brltty-x11 (= 6.3+dfsg-1+deb11u1)
Depends: brltty-speechd (= 6.3+dfsg-1+deb11u1)
Depends: brltty-flite (= 6.3+dfsg-1+deb11u1)
You could try apt-get remove (or equivalent) on each of those
packages and
see if that clears it. I _know_ this is frustrating as all get
out for you
but a clear approach, written down so that you can remember where
you got
to will be very helpful.
Any attempt to remove cura or brltty, removes gnome leaving me I
assume with a text only system by the time gnome takes all its
dependency's with it. Thanks Tom.
Have you actually tried uninstalling brltty only, as a separate
action from all others?
I have a number of gnome installations, unfortunately for this
discussion all bookworm. None of them has brltty.
I have a few installations of bullseye and an older stretch
installation, but none with gnome installed. On all of them, though,
"apt-rdepends -r gnome" fails to list brltty as a gnome dependency.
And on the bookworm systems, simulated installation of gnome ("apt
install -s gnome") shows brltty as a suggested package only and would
not install it along with gnome; on the stretch system, gnome
installation makes no reference at all to brltty.
While I have both with only the radio buttons for keyboard and rodent
plugged into usb at install time. I have only one wired keyboard and
no wired mice as I've had a lightning strike on the pole that serves
this house reach up and tap me by way of my fingers on the keyboard.
Wasn't that much of a tap, I've been tapped a lot harder that that,
hard enough to trigger a 6 month round of shingles and the burns were
months healing. And in this case did not damage the keyboard or
computer, but I did get the message. I've had many strikes on that
pole since I built a garage on the end of the house, which caused me
to install a 200 amp service and bring my grounding specs up to NEC.
Zero problems since then (2008)
Is it possible you have apt settings that automatically pull in
suggested packages, and that is interfering with attempts to remove
brltty? I am not expert enough wrt apt and its relatives to know
whether that even makes sense, and it seems a bit far fetched if
maybe barely possible.
Maybe if you post the output from "apt-rdepends -r brltty" and "apt
purge --simulate brltty" it will be informative.
Neither of those utils are installed. Should they be?
apt should be installed. As far as I know it has been included by
default in the Debian base system as the preferred command line package
management program since buster or earlier. I have never had to install
it. You probably should if it is missing.
apt-rdepends is at least partly redundant with apt.
The command "apt-rdepends -r <package-name>", and "apt rdepends
<package-name>" both show reverse dependencies of <package-name>; the
latter also shows suggestions (packages that suggest <package name, I
think).
If you have apt installed, you probably do not need apt-rdepends.
I was not aware that apt had that talent built it, thank you.
Regards,
Tom Dial
Regards,
Tom Dial
If all else fails, you can then share it with the list and say "I
got to
step X with no problems, then Y happened - help me out here" and
we'll
have some better idea. We all jib at you for being vague/not
indluding
details but otherwise it is all just guesswork for the usual folk
that
hang out here.
All the very best, as ever,
Andy Cater
How much longer till trixie is officially out?? What you are
proposing sounds like several days work, and i have other irons in
the fire. This release has been such a disaster for me because the
install insists on installing and configuring orca and brltty w/o
asking. I've done 40 some installs now, trying to stop it from
wasting about a second while its yelling every keystroke at me
because it thinks I'm blind. I finally have orca disabled and the
computer is useful. The delays are a pain in the a$$ but i can do
work now. It is not useful when orca is using 90% of a 6 core I5
yelling at me loud enough to announce and pronounce every
keystroke or mouse motion/click loud enough to wake the
neighbors. The first 23 installs never asked me if I wanted that
crap. And if you nuked the orca executable it would not reboot but
hung forever waiting for orca to start. I have it usable, the
installer AFAIAC is broken and I don't want to have to go through
all that again. Until the installer ASKS me if I want it because
it thinks I am blind, I have only one nerve left and and the
suggestion that I do yet another install, is standing on it.
Trying to remove it now, it insists on removing gnome and every
dependency. I just checked again with synaptic, removing either
orca or brltty still wants to destroy the system, Yet all I get
when I fuss about the broken installer is "won't fix, not broken'.
Hi Gene,
I, too, am not in need of the services that brltty or orca
provide, and have noticed them hanging about from time to time,
although I have not encountered any difficulties like you describe.
On a bullseye system, apt-rdepends -r brltty informs me:
# apt-rdepends -r brltty
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
brltty
Reverse Depends: brltty-espeak (= 6.3+dfsg-1+deb11u1)
Reverse Depends: brltty-flite (= 6.3+dfsg-1+deb11u1)
Reverse Depends: brltty-speechd (= 6.3+dfsg-1+deb11u1)
Reverse Depends: brltty-x11 (= 6.3+dfsg-1+deb11u1)
brltty-espeak
brltty-flite
brltty-speechd
brltty-x11
If I understand apt-rdepends correctly, you should be able to
remove/purge brltty ("apt purge brltty") without removing any
installed packages other than the four listed above.
apt-rdepends -r orca tells me:
# apt-rdepends -r orca
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
orca
Reverse Depends: gnome (>= 1:3.38+3)
Reverse Depends: gnome-orca (3.38.2-2)
Reverse Depends: orca-sops (1.0.2-2)
gnome
gnome-orca
orca-sops
So removing orca would also take gnome, and that probably is
unacceptable to you. Accordingly, you need to tame orca to find the
process that causes it to run and persuade it not to do that.
I found, on a bookworm install (I have no bullseye with gnome and
orca), that running orca -s from a terminal will bring up a
settings panel with a check box for "Enable speech" under the
"Speech" tab. Unchecking that box and selecting the "Apply" button
will silence Orca. I think that leaves some of its subtasks
running, as children of the systemd --user task; I am far from
expert here. They do not seem to use significant resources, however.
Alternatively, you can find orca's process, for instance, with "ps
-ef | grep orca", and kill it. The -HUP signal is enough. Or you
can kill its parent process (third column in the ps -ef output) if
it is not a necessary one, or maybe teach it how to not start orca
in the first place,
I hope this is useful. Things like this can be very annoying.
Regards,
Tom Dial
Thank you Tom
Cheers, Gene Heskett, CET.
Cheers, Gene Heskett, CET.
--
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author, 1940)
If we desire respect for the law, we must first make the law respectable.
- Louis D. Brandeis