https://wiki.mozilla.org/B2G/QA/Tips_And_Tricks#Hardware_Cheat_codes
FYI, Inari refers to the ZTE Open.
Doing the vol down+up + power should put you in fastboot mode.
This means that the "fastboot" should be able to see the device. ie:
fastboot devices
If that is the case, then you can flash partition images onto the phone
using fastboot. This is what the flash.sh script does. It puts the
device in fastboot mode and then flashes the images per fastboot.
Chances if you are in fastboot mode then the boot.img that they pointed
you to worked. The problem is described by Eduardo on a separate
thread:
http://sl.edujose.org/2013/10/adapted-boot-image-for-use-with-b2g.html
Once you place the boot.img in the proper location, give flash.sh
another go. If that still doesn't work please let me know.
The other thing we could potentially do is flash just gecko/gaia on the
device provided that you can reboot the device and have adb access.
This is done by :
<project folder>/flash.sh gecko
<project folder>/gaia/make reset-gaia
Regards,
Naoki
On 10/15/13 10:29 AM, daniel.i...@googlemail.com wrote:
Michael: Thank you but, it took around 15 e-mails and over two weeks mailing
around with the eBay seller until they actually understood my problem. They
kept pointing me to the download already discussed in this thread over and over
again, and I had the impression that I was talking to a wall. As explained,
when they finally realized the actual problem they offered me a new phone for
80% of the initial price (which is a 20% discount).
Again, I am not willing to throw an almost completely new phone (never carried
around, no scratches, screen cover not removed yet etc.) in the trash can and
buy a (discounted) new one just because the firmware is bricked and ZTE refuses
to reflash it. This is the complete opposite of what I was expecting from a
device marketed as developer phone - not mentioning that it's completely crazy
when looking at it from an ecologic perspective.
Vinayak: Well, this is as similar to my situation, I assume you can also access
see the device over USB being in diagnostic mode when you boot it by holding
both voldown+volup + power although the screen remains black?
_______________________________________________
dev-b2g mailing list
dev-b2g@lists.mozilla.org
https://lists.mozilla.org/listinfo/dev-b2g
_______________________________________________
dev-b2g mailing list
dev-b2g@lists.mozilla.org
https://lists.mozilla.org/listinfo/dev-b2g