I was having the same problem yesterday. Haven't tried today. Sometimes it
would - sometimes it wouldn't.
Something is wrong with the test environemt I rekon - but of course the
usual response is... "Must be something wrong with your setup." Which is the
standard system administrator response. I've used it myself.
I was getting EXACTLY the same reponse. The Authentication error. and no,
there is nothing wrong here. The exact same set up worked fine the day
before yesterday.
Robert
>
> verify_install.cgi shows valid server login sometimes and other times it
> doesn't...reg_system.cgi for a simple lookup fails all the time...earlier,
> it was failing with authentication failure. I have changed things around
> while trying to figure out what was wrong and when i turned on reg_systems
> debug flag I get the following:
>
> Registration Error
> The error which occurred was:
> Authentication Error: OPS Decode Error: Envelope Protocol Not Supported
>
> What is going on with this?
>
> -bryanw
>
> -----Original Message-----
> From: Charles Daminato [mailto:[EMAIL PROTECTED]]
> Sent: Tuesday, August 21, 2001 6:29 PM
> To: Bryan Waters
> Cc: [EMAIL PROTECTED]
> Subject: Re: Authentication Failure
>
>
> Bryan,
>
> That's quite odd - could you send me a URL I could look at with your
> verify_install and your reg_system?
>
> I'm assuming you've got only one OpenSRS.conf file you're pointing things
> at?
>
> Charles Daminato
> TUCOWS Product Manager
> [EMAIL PROTECTED]
>
> On Tue, 21 Aug 2001, Bryan Waters wrote:
>
> > My verify_install.cgi indicates successful login when i run it...but not
> of
> > the other scripts allow me to submit anything without generating an
> > Authentication failure.
> >
> > 1) I have verified the private key
> > 2) I have made sure permissions are set correctly...
> > 3) I can login to the reseller test website without problems although it
> > seems slow...
> >
> > Also, I am running on the test environment...
> >
> > thx
> > -bryanw
> >
> >
>
>
>
