Same problem here... Something definitely is wrong with the test
environment.
----- Original Message -----
From: "Robert" <[EMAIL PROTECTED]>
To: "Bryan Waters" <[EMAIL PROTECTED]>; "Dev-List@Opensrs. Org"
<[EMAIL PROTECTED]>
Sent: Tuesday, August 21, 2001 8:59 PM
Subject: Re: Authentication Failure
> I was having the same problem yesterday. Haven't tried today. Sometimes it
> would - sometimes it wouldn't.
> Something is wrong with the test environemt I rekon - but of course the
> usual response is... "Must be something wrong with your setup." Which is
the
> standard system administrator response. I've used it myself.
> I was getting EXACTLY the same reponse. The Authentication error. and no,
> there is nothing wrong here. The exact same set up worked fine the day
> before yesterday.
>
> Robert
>
>
>
> >
> > verify_install.cgi shows valid server login sometimes and other times it
> > doesn't...reg_system.cgi for a simple lookup fails all the
time...earlier,
> > it was failing with authentication failure. I have changed things
around
> > while trying to figure out what was wrong and when i turned on
reg_systems
> > debug flag I get the following:
> >
> > Registration Error
> > The error which occurred was:
> > Authentication Error: OPS Decode Error: Envelope Protocol Not Supported
> >
> > What is going on with this?
> >
> > -bryanw
> >
> > -----Original Message-----
> > From: Charles Daminato [mailto:[EMAIL PROTECTED]]
> > Sent: Tuesday, August 21, 2001 6:29 PM
> > To: Bryan Waters
> > Cc: [EMAIL PROTECTED]
> > Subject: Re: Authentication Failure
> >
> >
> > Bryan,
> >
> > That's quite odd - could you send me a URL I could look at with your
> > verify_install and your reg_system?
> >
> > I'm assuming you've got only one OpenSRS.conf file you're pointing
things
> > at?
> >
> > Charles Daminato
> > TUCOWS Product Manager
> > [EMAIL PROTECTED]
> >
> > On Tue, 21 Aug 2001, Bryan Waters wrote:
> >
> > > My verify_install.cgi indicates successful login when i run it...but
not
> > of
> > > the other scripts allow me to submit anything without generating an
> > > Authentication failure.
> > >
> > > 1) I have verified the private key
> > > 2) I have made sure permissions are set correctly...
> > > 3) I can login to the reseller test website without problems although
it
> > > seems slow...
> > >
> > > Also, I am running on the test environment...
> > >
> > > thx
> > > -bryanw
> > >
> > >
> >
> >
> >
>
>
>
