Hello Ive been using rfsm2400 for emcom purposes it is awesome I have sent simulated reports to stations in as little as 31sec min text format my question is what freq are available and calls for email access and other info would be great thanks MATTHEW A. GREGORY KC2PUA
----- Original Message ---- From: John Bradley <[EMAIL PROTECTED]> To: digitalradio@yahoogroups.com Sent: Monday, October 13, 2008 12:19:58 PM Subject: RE: [digitalradio] RFSM file transfer I agree with Les… great program under moderate to good conditions. I haven’t tried anything as big as 4mb file, but have great results with text and .jpg files of 20 to 50K … RFSM passes these in just a few minutes… a 30k file in under 2 minutes under good conditions. Have been using the email server function on RFSM with good success, passing emails back and forth from HF digital to the internet…. Now that summer is over in this part of the world , will get back to playing with this and other software John VE5MU From:digitalradio@ yahoogroups. com [mailto:digitalradi [EMAIL PROTECTED] com] On Behalf Of Les Keppie Sent: Sunday, October 12, 2008 7:58 PM To: digitalradio@ yahoogroups. com Subject: Re: [digitalradio] RFSM file transfer Hi Tommi In testing here in VK - VK2JN and VK2DSG have passed files in excess of 4 Mb on 80m band - best time seems to be late afternoon when atmospheric noise is a lesser problem Both stations here using licenced versions of RFSM8000 VER .534 To achieve these speeds around the 3000 bps you do require quite good S/NR figures - but who is going to try and pass a 4mb file if S/NR is -5 - just forget about it until you have good conditions Sound card calibration is another thing that requires some attention using this program to get the best transfer speeds Here in VK we both used CheckSR.exe from MixW - and Calibrate.exe from RFSM8000 - later withdrawn by author But we used to calibrate with both programs and then made an average reading of both results and used this in the tx/rx soundcard setup In my opinion - a good program for use on HF - given fair to good conditions and maybe a lot better on VHF Regards Les VK2DSG From:Tommi Holopainen Sent:Monday, October 13, 2008 6:04 AM To:digitalradio@ yahoogroups. com Subject:[digitalradio] RFSM file transfer Hello Just wondering has anybody else tryed transfer quite big files on HF with RFSM or some other mode?. We just tranfered OH7TE ---> OH7JJT "Big" 1.3 MB file 80m band. File was simply zipped program file. Propagation on 80m band was not very good, some qrm, aurora and fading as usually here dark time. We had abt 400 km QRB. Transfer time was about 1 hour Stations setup: OH7JJT: Yaesu FT 990 40 w Dipole abt 8 m up Software RFSM 8000 version 0.534 OH7TE JUMA TRX2A Digi Mode Edition + Lauta Mosfet PA abt 60 w Dipole up 12m Software RFSM 8000 version 0.534 -Tommi OH7JJT-
