Here are the extensions that were installed:
USR PC Card Extension
Ethernet�Modem Enabler
ProSoft Ethernet SMC
the Connect Via has an option of USR XJAEM3336
I would assume that the ethernet driver would stay the same and that the only thing
you might need to do is alter the modem script a bit if at all, but I'm just guessing.
Ed
>What do you use for the ethernet driver? What does the "Connect Via:"
>popup in AppleTalk and TCP/IP refer to it as?
>
>I would suspect the same ethernet driver would work for the 56k version,
>and no drivers are needed for modems. (AFAIK)
>
>j
>
>On 1/20/00 11:26 AM, edward wu < [EMAIL PROTECTED]> wrote:
>
>>If you can find it (it's old), the USR XJAEM3336 made by 3Com (though it
>>was originally made by Megahertzm which was then bought out by USR, which
>>was taken over by 3com, etc) is great. It's kind of a compromise. The
>>phone cord goes into their proprietary "X-jack" which pops out of the
>>card, but the ethernet cable needs to be attached to a dongle. This works
>>great for me since I have a dongle at the office and at home for Ethernet,
>>and when I travel I only need the modem. The downside is that it's only
>>33.6 and not 56k. There's a 56k version out but I don't think Mac drivers
>>are available.
----------
Duo/2400 List, The friendliest place on the Net!
A listserv for users and fans of Mac subportables.
FAQ at <http://www.themacintoshguy.com/lists/DuoListFAQ.shtml>
Be sure to visit Mac2400! <http://www.sineware.com/mac2400>
X-Router | Share your DSL or cable modem between multiple computers!
Dr. Bott | <http://www.drbott.com/prod/MIH120.html>
PowerBook Guy is | Click here!
Everything PowerBook! | http://www.powerbookguy.com
Midwest Mac Parts ][ <http://www.midwestmac.com>
After-market parts for Macs. ][ 888-356-1104 ][
MacResQ Reader Specials: 2.5GB Seagate SCSI: $119, 4GB IBM SCSI: $199,
Norton Util. 4.0: $29, Mac Parts, Systems & Repairs <http://www.macresq.com>
