Cort,
As always, start with the example configuration for DX4Win and MK II from microHAM. In Router (Help | Download Documents) or on-line in the MK II area at www.microham-USA.com/support.html. DX4Win's support for MMTTY is a bit strange in FSK in that you must run MMTTY stand alone from the same path as used in DX4Win to configure the FSK port and set Configure MMTTY | MISC | TX Port to "COM-TxD(FSK)" because there is no way to pass the port/FSK setting from the DX4Win MMTTY window. 73, ... Joe, W4TV On 2015-02-03 9:21 AM, Courtney Judd wrote:
I have a question for you all... I am using FT2000D with microHam2 to WIN 7 PRO with Writelog and DX4WIN with MMTTY add on. Works great with Writelog but no dice with DX4WIn. MMTTY is located in C:\ham\mmtty\mmtty.exe and i use a virtual port 7 ... this works great with Writelog but when I select mmtty in DX4WIN from log entry/ window/mmtty I get a window that says mmtty could not be started, click ok and an empty mmtty window opens that is empty and non-responsive. In DX4WIN's preference under RTTY I have the above address shown at the bottom in the MMTTY window, com port 7, type = none! Any ideas of what to try? thanks Cort K4WI ______________________________________________________________ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
______________________________________________________________ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
