found another isue very similiar. I tried to get DX4WIN to use WINKEY
which works great in Writelog using the key or F messages. In DX4WIN the
key will work but when you open the keyboard window a message pops up
saying that it could not open the winkey port... something in DX4WIN is
not working with the router... ideas? Cort
Joe Subich, W4TV <mailto:li...@subich.com>
Tuesday, February 03, 2015 9:00 AM
Cort,
As always, start with the example configuration for DX4Win and MK II
from microHAM. In Router (Help | Download Documents) or on-line in
the MK II area at www.microham-USA.com/support.html.
DX4Win's support for MMTTY is a bit strange in FSK in that you must
run MMTTY stand alone from the same path as used in DX4Win to configure
the FSK port and set Configure MMTTY | MISC | TX Port to "COM-TxD(FSK)"
because there is no way to pass the port/FSK setting from the DX4Win
MMTTY window.
73,
... Joe, W4TV
______________________________________________________________
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
______________________________________________________________
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
