Hi Clark I really tried EVERYTHING ???
1) triple checked my bandplan. 2) set the log default to check for band/mode from rig when logging QSO (this works I can get freq into log) 3) everytime I click a spot, the rig's mode is set to correct mode but immediatly is reset to USB when the freq is changed to (QSY to spot) 4) the same happens on 144 Mhz but in FM instead of USB. So I end up comming back to USB (1.8 - 50 Mhz) or FM ( 144-440) with all spot qsy's. I tried all settings, using ts2000 - 570 - 870, with, without bandmap, etc... No luck ... Phil ----- Original Message ----- From: "Clark L. Stewart" <[EMAIL PROTECTED]> To: "Phil ON4VP" <[EMAIL PROTECTED]> Sent: Wednesday, December 04, 2002 5:50 PM Subject: Re: [DXBase] setting mode won't work > Phil, > > I may not be able to help you but I do have my TS-2000 running with > DXbase 2002 and it follows the bandplan with incoming spots > perfectly. Sometimes, too perfectly. The only problem I have is that if a > station is operating CW high in the band then DXbase will set the radio to > FSK instead of CW but it is doing just what the bandplan tells it to do. > > If you want, give me more specific information and I'll see what my > radio does. Does this happen on EVERY spot, regardless of band or frequency? > > Just to make sure my system was working I connected to an Internet > PacketCluster then clicked on spots on various bands and modes. The > TS-2000 QSY'd to 80-M LSB, 40-M CW, 10-M USB and 10-M CW. BOTH band and > mode changed when I clicked in the "Type" column of the incoming spot. > > Here is my set-up: > > Tools | Options | User Options > > HF Radio Tab > > Kenwood TS-870 > > (Checkmark) Connect HF Radio Serial Interface > > (Radio Button) None > > Set HF Radio RTTY Mode (Radio Button) FSK > > (Checkmark) default DTR High > > Serial Port COM2 > Baudrate 9600 > Parity None > Word Length 8 > Stop Bits 1 > > If you are running DXbase 2003, I will load up my version of DXbase > 2003 and try it with my TS-2000. > > Let me know anything you want me to check and I'll see what I can do > to help you get your TS-2000 working with DXbase. > > > > At 08:57 AM 12/4/02 +0100, you wrote: > >I still struggle to get my TS2000 into exact mode > > > >When I click the spotted station, the freq is set but I see the mode > >jumping to the mode in the bandplan and then immediatly jumps back to USB, > >this is very enoying. > > > >Any tips ... > > > >Tnx, Phil ON4VP > > > CUL, 73, Clark, W8TN > > email: [EMAIL PROTECTED] or [EMAIL PROTECTED] > Webpage: <http://www.w8tn.com> > > >
